PVC banners
Custom PVC banners
Print PVC banners on 510 or 650 gr banner material, with cutting, eyelets and bungee cords to choose when you place the order. The PVC banner is used for advertising banners, event communication, temporary facade signage and trade show displays. The three product pages differ in the materials you can select.
Which PVC banner to choose
- Standard PVC banner: 510 gr banner, with a matt finish or a black back. This is the page for everyday use, indoors and outdoors.
- Outdoor banners: a single page with three materials, 510 gr matt banner, 320 gr mesh and 650 gr heavy banner, and quantities from 1 to 100 pieces. Suited to campaigns across several locations, franchises and retail chains.
- Heavy 650 g PVC banner: heavy banner only, for facade banners, fences and outdoor advertising structures with long-term exposure.
PVC banner weights and cutting
The 510 gr banner is available with a matt finish or a black back. The 650 gr heavy banner is the higher weight. On the outdoor page you will also find the 320 gr mesh, a micro-perforated alternative to solid PVC for windy locations.
Cutting has three levels: uncut material on the roll, square cut, square cut with reinforcement.
Matt finish or black back
The standard PVC banner is the only product where you choose between two versions of the 510 gr banner. The matt finish is the classic banner material, with a printed surface that does not reflect light. The black back has a dark rear side: it is the version to consider when the banner has a light source or another graphic behind it and you do not want it to show through. On the outdoor banners, the 510 gr banner is only available with a matt finish.
The three types of cutting in practice
- Uncut, on the roll: you receive the printed material with the margins still to be trimmed. It makes sense if you or your installer will do the finishing.
- Square cut: the banner is trimmed to the ordered size, with a raw edge.
- Square cut with reinforcement: besides trimming, the perimeter is reinforced. This is the choice to combine with eyelets and bungee cords, because the edge is where the banner takes the strain when it is stretched.
PVC banners with eyelets, bungee cords and hems
For an eyelet PVC banner choose one of the layouts: the whole perimeter, corners only, top and bottom, right and left. If you need specific positions, mark them in the file with red dots. The bungee cords are black or white, 15, 20 or 30 cm long. Hems are requested in the configurator and then described in the notes.
How to choose between eyelet layouts:
- around the whole perimeter, when you fix the banner to a fence, a mesh or a structure with many attachment points;
- corners only, for small banners to stretch with four ropes;
- top and bottom, when you hang it from two bars or two horizontal cables;
- right and left, when you stretch it between two poles or two walls;
- as per file, in every other case: you mark the points.
Bungee cords are used to hook the eyelets to the structure while keeping the banner under tension. Choose the colour, black or white, according to the structure, and the length according to the distance between the banner and the attachment point. Hems are a different fixing system from eyelets: if you request them, state in the notes on which sides and with what details.
PVC banner sizes and quantities
Banners are ordered made to measure: in the configurator you enter width and height in centimetres. The standard PVC banner and the outdoor banners have no maximum size in the list. The heavy 650 g PVC banner has a maximum size of 300x300 cm. For the heavy banner and for the outdoor banners, the quantities in the configurator are 1, 10, 25, 50 and 100 pieces.
Before configuring, measure the space where the banner will be stretched and subtract the space taken up by ropes or bungee cords. A very long, low banner, such as those for fences, should be designed with large lettering on a single line.
How to choose PVC banners: 510 gr, 650 gr or mesh
- Event lasting a few days, trade show, in-store promotion: 510 gr banner.
- Banner that must stay up outdoors for a long time, on a facade or fence: 650 gr heavy banner.
- Position very exposed to wind: consider the 320 gr mesh, available in the outdoor banners.
- Same graphic across several stores: outdoor banners, where you set the quantity up to 100 pieces and choose the material for each order.
File preparation and packaging
Keep text and logos at a suitable distance from the edges, especially if you plan to use eyelets or reinforcement. The banner can be folded flat or rolled in a cardboard tube. Read the file instructions before uploading your artwork. Available production times are shown in the configurator; delivery is also affected by transport.
Prepare the file in the same proportions as the ordered size and use colours with good contrast between background and lettering. The price is calculated by the configurator based on the chosen configuration: size, material, quantity and finishing. Before confirming, you only need to review the summary.
Frequently asked questions
Is a 510 or 650 gr banner better?
For events, temporary signage and trade show displays, 510 gr is recommended. Switch to 650 gr for facades, fences and structures that stay exposed outdoors for a long time.
Where are the eyelets applied?
Where you ask for them: on the perimeter, at the corners, on two opposite sides or at the points marked in the file. You can also order the banner without eyelets.
Does the banner arrive folded or rolled?
You decide in the configurator: folded flat or in a cardboard tube.
How big can a PVC banner be?
The 650 gr heavy banner goes up to 300x300 cm. On the other two pages you enter width and height freely.
Are the bungee cords included?
No, they are an option. Among the values there is "Without bungee cords"; if you need them, you add them by choosing colour and length.
Can I have reinforcement without eyelets?
Yes. Cutting and eyelets are two separate items: you can ask for the square cut with reinforcement and leave the eyelets set to None.
What is the difference between the standard PVC banner and the outdoor banners?
The materials. The first has the 510 gr banner, matt or with a black back. The others have 510 gr matt banner, 320 gr mesh and 650 gr heavy banner, with quantities in the list from 1 to 100.


