Large Format for Facades and Construction Sites

Maxi-format panels printed on 320 gsm microperforated mesh for covering scaffolding, construction-site façades and temporary structures. The mesh's wind permeability is mandatory under scaffolding safety regulations, so no other material is available for this product. Each panel is finished with perimeter welding and, if the eyelet option is selected, with metal eyelets every 60 cm along three sides. The fourth side, intended for the overlap, remains without eyelets to allow a clean join between adjacent panels using cable ties applied directly through the mesh. Fully customizable sizes, available in quantities from 1 to 100 pieces with progressive volume discounts. Suitable for construction companies, display contractors, outdoor advertising companies and general contractors. Sizes wider than the roll (320 cm). When both sides exceed 320 cm, the product is made by dividing it into panels: the panels are printed separately and supplied loose, not welded together, each with perimeter reinforcement and eyelets along three sides (if selected), following the layout described above. The installer assembles the covering on site by placing the panels side by side and fastening them with cable ties at the overlaps. The panel-division artwork and calculation of standard overlaps are included in the price, with no additional charges or separate quotations.