Custom wallpaper printing
Custom wallpaper printing made to measure
On this page you can configure the printing of custom non-woven wallpaper and adhesive wall murals, starting from your own file. Both cover a wall with a photograph, an illustration, a texture or graphics coordinated with the space: living rooms, bedrooms, offices, professional studios, shops and hospitality venues. The material and the available finishes are what differ.
Which wall covering to choose: non-woven wallpaper or adhesive wall mural
- Non-woven wallpaper: for interiors, when you want to choose the texture of the surface. The material is available in eleven variants, from 350 to 390 g/m², and colour printing is included. Choose the cut, untrimmed on the roll or squared; it is packed in a cardboard tube.
- Adhesive wall mural: when you prefer an adhesive material. It is printed on glossy white High Tack wall PVC and can be finished with a gloss or matt lamination. Here too the cut is your choice between untrimmed on the roll and squared.
Where printed wallpaper is used
At home, custom wallpaper gives character to a single wall: the one behind the sofa, the bedhead, the entrance. You start from a photo, a drawing or a repeating pattern and scale it to the size of the wall.
In workplaces and shops, wallpaper printing brings a brand's colours and images onto the walls. Architects and interior designers include it in the project as a design element, with a subject created for that space.
Materials and finishes
Printing of non-woven wallpaper (non-woven fabric) offers eleven materials, distinguished by texture and weight:
- 350 g/m²: Canvas NW, Sand, Smooth, Textile;
- 380 g/m²: Classic, Scratch, Fabric, Twist, Linen;
- 390 g/m²: Scratch Gold, Scratch Silver.
The adhesive wall mural has a single material, glossy white High Tack wall PVC, with three finishing options: no lamination, gloss lamination with UV filter or matt lamination with UV filter.
High Tack PVC has a high-tack adhesive, designed for rough and porous surfaces such as plastered walls, brick and plasterboard. Without lamination, the print is recommended only for indoor and temporary use; the film with UV filter protects it from scratches and sunlight and, in the matt version, is anti-glare. This makes it easy to match the finish to the needs of the wall.
How to choose the type of non-woven material
The name of each material describes the type of surface. Read it together with the weight.
- Smooth: the smooth surface, for photos and images with a lot of detail.
- Canvas NW, Textile, Fabric, Linen: textures reminiscent of canvas and fabric.
- Sand, Scratch, Twist, Classic: surfaces with a texture of their own, to be assessed according to the subject.
- Scratch Gold and Scratch Silver: the two 390 g/m² variants with a gold and silver base.
If the artwork has small text or thin lines, a pronounced texture makes them less sharp: in that case, choose a smoother material.
In more detail: Canvas NW has a pronounced embossing with a linen canvas effect, Sand a fine, irregular sand-effect grain, Classic a rough, soft texture reminiscent of plaster, Twist a pronounced weave similar to raw jute. Smooth is smooth and matt, suited to photographs, illustrations and fine details. The roll width also varies: 130 cm for Canvas NW, 137 cm for Sand, Smooth and Textile, 106 cm for Classic, Scratch, Fabric, Twist and Linen.
Sizes, panels and cut
Enter the actual dimensions of your wall in the configurator: width and height in centimetres. For both products you choose whether to receive the print untrimmed, on the roll, or with a squared cut. Non-woven wallpaper is packed in a cardboard tube.
On large surfaces, plan the alignment and continuity of the subject from one panel to the next. Measure the height at several points: floor and ceiling are not always parallel, and a few centimetres of margin in the artwork avoids coming up short.
File and order
Upload a file with proportions that match the wall. Keep details that must not be cut away from the edges and check where doors, windows and sockets fall relative to the image. The price is calculated by the configurator based on size, quantity and finishes.
Read the file instructions before sending. In the configurator you will find the available production times; the chosen shipping method also affects delivery.
Frequently asked questions
What is the difference between non-woven wallpaper and adhesive wall mural?
Non-woven wallpaper comes in a choice of eleven textures. The wall mural is an adhesive glossy white PVC, with optional lamination.
Does the adhesive wall mural need lamination?
It is up to you. You can order it without lamination or with gloss or matt lamination, both with UV filter.
Can I print wallpaper from a photo?
Yes. Printing starts from the file you upload: photo, illustration or artwork.
Is colour printing a separate option?
No. For non-woven wallpaper the printing option has a single value: colour printing included.
What weights does non-woven wallpaper come in?
350, 380 or 390 g/m², depending on the material chosen.
Is the squared cut or the untrimmed roll better?
It depends on who carries out the installation. With the squared cut the print arrives to size; with the untrimmed roll the final cut is made on site.
How is the wallpaper packed?
Non-woven wallpaper is rolled in a cardboard tube. The tube is rigid, with closing end caps.

