Economy roll-up 85x200, 1-sided kit

Economy single-sided roll upEconomy single-sided roll upEconomy single-sided roll upEconomy single-sided roll up

Quantity: 1; Dimensions: 85 X 200 CM; What do you need?: Print + Frame (pre-assembled)

The economy single-sided roller banner display is a floor-standing retractable support with the graphic printed on one side only, in the 85 x 200 cm format. It is the essential version of the roller banner, for those looking for a simple display that is easy to carry and open at trade shows, events, retail stores and temporary setups. You order it as print plus structure, already assembled or to be assembled. If you already have the display you can request print only to update the graphic; if you lack the support, structure only. Quantities range from 1 to 100 pieces. The banner sheet is not a standard banner: it is a polypropylene made specifically for roller banners, with grey back and anti-curl technology, which prevents the typical curled edges at the sides.

Take a look at these too

Economy single-sided roller banner: the essential display

An economy single-sided roller banner meets a specific need: a vertical graphic standing next to a stand, a checkout or an entrance, at a low cost. The print is on one side only, so it should be placed against a wall or with its back to an area where nobody walks. It is a frequent choice for trade shows, events, retail stores and setups that are assembled and taken down often.

Polypropylene banner sheet with grey back and anti-curl technology

The banner sheet is not a PVC banner: it is a polypropylene made specifically for roller banners, with a grey back. The anti-curl technology helps reduce curling of the edges of the banner sheet when the roller banner is open.

Where a single-sided roller banner display is used

The vertical format takes up little floor space and brings the message to eye level. Some typical settings:

  • the trade show stand, beside the counter or at the back;
  • the retail store, to highlight a new product, a service or a promotion;
  • the room of a conference or presentation, next to the speaker;
  • the entrance of an office or event, as a welcome sign.

In all these cases the back of the display is not visible, and the single-sided version suits the purpose.

What you can choose: the supply

The only real choice is the supply, under the "What do you need?" option.

  • Print + Structure (already assembled): the banner sheet is already inserted in the structure and fixed to the top pole. You take it out of the bag and open it.
  • Print + Structure (to be assembled): banner sheet and structure arrive separately. You insert the banner sheet into the cassette and hook it onto the pole. This is the recommended option when the displays have to be shipped to several locations.
  • Structure only: aluminium base, pole and bag, without graphics.
  • Print only: the replacement graphic, without the support, to change campaign on the structure you already have.

Size and quantity

The size is fixed, 85 x 200 cm. You can order 1, 3, 5, 10, 25, 50 or 100 pieces: a single display for one store, or an identical series for a network of retail locations. The price is calculated by the configurator based on quantity and supply.

How to choose supply and quantity

  • It is your first roller banner and you want to use it right away: Print + Structure already assembled.
  • You are already comfortable with assembly, or you need to ship the displays to several locations: the supply to be assembled gives you the same elements, for you to put together.
  • You have the structure and only the campaign changes: Print only, in the same 85 x 200 cm format.
  • You need a spare support, or yours is damaged: Structure only.
  • You need to set up several locations with the same graphic: choose the quantity tier closest to the number of displays you need.

Artwork: practical tips on format and file

The file must have the proportions of the format, 85 x 200 cm, set up vertically. Keep the logo and main message in the upper and central part, which is read first; a few large elements read better than many small texts. The lower area is close to the base: avoid placing contact details or important information there. Use colours and text with good contrast, and check the summary before confirming.

Order and files

Select quantity and supply and upload a file for the printed side. Read the file instructions before sending the artwork. The available production times are shown in the configurator; delivery also depends on the chosen shipping method.

The complete kit includes print and structure: you can receive it already assembled, for quick setup, or to be assembled.

Margins and checks before sending the file

Trimming can remove 1-2 mm from the format. Keep essential text, logos and frames at least 2-3 mm inside the finished size of 85 x 200 cm. For bleed and the other technical details, see the file instructions. If the banner sheet is going on a structure you already own, first check that it is made for 85 x 200 cm banner sheets.

What to pair with the roller banner display

At a trade show or in a store the display attracts attention, but people who stop often want to take something away. A half-fold leaflet with services and contact details completes the roller banner's message: you can reuse the display's colours and title, so the two materials are recognised as part of the same campaign.

Frequently asked questions

What does single-sided mean?

It means the graphic is printed and visible on one side of the display only.

Can I change the graphic and keep the same structure?

Yes. Order Print only in the 85 x 200 cm format.

Do I have to assemble it myself?

Only if you choose the supply to be assembled: in that case you insert the banner sheet into the cassette and hook it onto the pole. With the "already assembled" option, print and structure arrive joined together.

Is the bag included?

Yes, with the structure: Structure only includes aluminium base, pole and bag.

Are there other sizes besides 85 x 200 cm?

No, there is only one size available.

Can I order just one roller banner display?

Yes. Quantities start at 1 piece and go up to 100.

I need the graphic on two sides: what should I order?

This model is single-sided. You can find the double-sided versions in the configurator of the Roller banner 85x200 cm, linked below.

Can I buy only the structure?

Yes, with the Structure only option.

Is the replacement print made of the same material?

Yes. Even with Print only you receive the polypropylene banner sheet made specifically for roller banners, with grey back and anti-curl technology.

Is the structure alone suitable for a banner sheet I already have?

Structure only is compatible with standard 85 x 200 cm banner sheets. It can also be used as a reusable support with interchangeable banner sheets.

Related products

To compare all the versions in the same format, open the Roller banner 85x200 cm page or the Economy roller banner category.

If the display stands in the middle of a walkway and must be read from two sides, see the economy double-sided roller banner display. For the luxury line there is the luxury roller banner display. To compare all the models, start from Custom roller banners for advertising. To pair with the roller banner at a trade show, look at the half-fold leaflets. To go back to the comparison in the same format, open the 85x200 cm roller banner display.

Dall’idea al file pronto per la stampa

Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.

Scopri il servizio di progettazione grafica

Il servizio grafico è incluso nel prezzo di stampa?

La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.

Total: 45,50 € (VAT included)