Outdoor signs



No. Copies: 1; Dimensions in CM: 40x40; Material: 3 mm clear Plexiglass; Cut: Square cut; Finishing: None; UV metallic effect: None; Clear Raised-Effect Varnish Printing: No; Drilling: Without Holes; Spacers: Without Spacers
The custom outdoor signs for businesses and practices are rigid signs to be fixed next to the entrance, with company name, logo and contact details. They are made in clear, white or black Plexiglass and in white or metallic grey Dibond, in free sizes up to 50x40 cm. Besides the straight or shaped cut you can ask for rounded corners. The print can be enriched with the gold or silver metallic effect, clear raised varnish and the ice effect on clear Plexiglass. Holes and standoffs in satin silver or matt black are used for wall mounting. Order from 1 to 5 copies.
Take a look at these too
Custom outdoor signs for practices, offices and businesses
An outdoor sign shows your business to anyone arriving from the street or the courtyard: a professional practice, an office, a shop or a company headquarters. This product page is designed for a small number of copies with carefully finished details, using print finishes that bring out logos and text.
Materials and options
- Material: clear Plexiglass in 3, 5 or 10 mm; white or black Plexiglass in 3 or 5 mm; Dibond 3 mm in white or metallic grey.
- Cut: straight cut, shaped cut or rounded corners.
- Finish: none or Ice Effect, for clear Plexiglass only.
- White ink printing: yes or no. Useful as a base on clear or dark materials.
- UV Metallic Effect: none, gold or silver, to give a logo or lettering a metallic look.
- Clear Raised Varnish Printing: yes or no. Adds a raised clear layer on the parts you want to highlight.
- Drilling: no holes, four holes in the corners, two holes at the centre of the right/left sides.
- Standoffs: no standoffs, satin silver, matt black.
Sizes and copies
Sizes are free up to 50x40 cm. The available quantities are 1, 2, 3 or 5 copies. The configurator calculates the price based on size, quantity and the options you choose.
The maximum size applies in both orientations: 50x40 cm for a horizontal sign, 40x50 cm for a vertical one. For several signs with different text, for example one for each professional in the practice, prepare a separate configuration for each.
How to order and prepare your file
Start with the material and size, then add the print effects and the mounting system. Before sending your artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the shipping method you choose.
How to choose the material
- Clear Plexiglass: the 3 mm is light and versatile, the 5 mm is thicker and more rigid, the 10 mm offers the greatest sturdiness. On a clear sheet, consider white ink printing as a base for the colours.
- White Plexiglass: a solid background that makes colours stand out, in 3 or 5 mm. The 5 mm is more rigid.
- Black Plexiglass: glossy, in 3 or 5 mm, suited to signs with white or metallic lettering. On 5 mm black, white ink printing is required as a base.
- Dibond 3 mm: a composite panel of aluminium and polyethylene, durable and light, in white or metallic grey.
Print effects: metallic, raised and ice
With the gold or silver UV Metallic Effect, the chosen areas are printed with a thick UV varnish: the result has a metallic look and is raised to the touch. Keep it for the name and logo, so the effect stands out from the rest of the sign.
The clear raised varnish adds a tactile layer on logos and graphics you want to highlight. Without this option the artwork stays flat on the surface of the material.
The Ice Effect, for clear Plexiglass only, is a satin texture on the back of the sheet, with the look of frosted glass.
To mark in your file the areas to be treated with the metallic or raised effect, read the file instructions.
Cut and shape of the sign
- Straight cut: a rectangle with 90° corners, with a classic, formal look.
- Rounded corners: a rectangular shape with standard radius corners, for a softer look.
- Shaped cut: a custom shape made by CNC milling, for example following the outline of the logo.
If the artwork extends to the edge of the shape, an external bleed is needed, and its size depends on the product specification: read the file instructions. In any case, keep text and logos at least 2-3 mm from the edge, because trimming can remove 1-2 mm.
Mounting: holes, standoffs or double-sided tape
- No holes: the sign is applied with double-sided tape or Velcro on the back.
- Four holes in the corners: four-point drilling prepared for mounting with standoffs.
- Two holes at the centre of the right/left sides: two-point side drilling, for screw fixing or with central standoffs.
- Standoffs: a set of 4 in satin aluminium (Satin Silver) or black with a matt finish (Matt Black).
If you choose holes, keep the corners or the centre of the sides clear: text and logos must not end up under the standoffs. As for colour, matt black matches black Plexiglass, while satin silver matches metallic grey Dibond or silver graphics.
Laying out an outdoor sign
- Highlight just one element, usually the name or the logo; put the other details in a smaller size.
- Choose simple typefaces with good contrast against the background: light on black Plexiglass, dark on white.
- On a sign measuring 50x40 cm at most, a few lines are easier to read than a long text.
- Prepare the file in the same proportions as the sign you order.
- Check spelling, phone numbers and addresses before uploading the file.
Frequently asked questions
Can I have the logo in gold or silver?
Yes, with the UV Metallic Effect, available in Gold and Silver.
What is the difference between a straight cut and rounded corners?
The sign stays rectangular in both cases; with rounded corners the edges are softened. The shaped cut follows a free form instead.
What is the maximum size?
50x40 cm.
How do I fix it to the wall?
With two or four holes and, if you wish, satin silver or matt black standoffs.
What should I write on an outdoor sign?
The name of the practice or company, the logo and a few other details, such as floor and opening hours. Some elements can be printed with the gold or silver metallic effect.
Can I have a raised logo?
Yes. You can use the clear raised varnish or the gold or silver metallic effect, which is also raised to the touch.
What is the difference between Plexiglass and Dibond?
Plexiglass is available clear, white or black, from 3 to 10 mm depending on the colour. Dibond is a composite panel of aluminium and polyethylene in 3 mm, white or metallic grey.
Can I have the ice effect on Dibond?
No, the ice effect is available only on clear Plexiglass.
Related products
For larger formats there are the Plexiglass signs; to be seen by people walking along the facade there is the Projecting sign. See also the Signs category.
Other useful pages next to outdoor signs:
- Aluminium signs: if you are looking for an aluminium sign.
- Custom nameplates for doors and desks: for doors and desks.
- Custom house number signs: for the building's house number.
- Custom award and commemorative plaques: for awards, recognitions and anniversaries.
- Information panels and outdoor signs: if you need an information panel or a sign outdoors.
- Custom wall banners and flags and National and institutional flag: to complete the entrance of a headquarters or an institution.
- The categories Custom signs and Plexiglass signs, custom nameplates collect the other models.
Dall’idea al file pronto per la stampa
Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.
Scopri il servizio di progettazione grafica
Il servizio grafico è incluso nel prezzo di stampa?
La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.
Configurations
- Outdoor acrylic plaque 40x40 cm (GB)
No. Copies: 1; Dimensions in CM: 40x40; Material: 3 mm clear Plexiglass; Cut: Square cut; Finishing: None; UV metallic effect: None; Clear Raised-Effect Varnish Printing: No; Drilling: Without Holes; Spacers: Without Spacers
- Outdoor acrylic plaque 40x40 cm (US)
No. Copies: 1; Dimensions in CM: 40x40; Material: 3 mm clear Plexiglass; Cut: Square cut; Finishing: None; UV metallic effect: None; Clear Raised-Effect Varnish Printing: No; Drilling: Without Holes; Spacers: Without Spacers
Starting from 164,00 €/m², VAT excluded · Total: 32,01 € (VAT included)