Decorative window graphics 100x100 cm, 2 pcs




No. Copies: 2; Dimensions in CM: 100x100; Material: Matt White Self-Adhesive PVC; Lamination: None; Adhesive cutting: Untrimmed, on a roll
Custom decorative window graphics for glass are adhesive films printed with your artwork: illustrations, patterns, botanical motifs or geometric designs to apply to windows, doors and partition walls. The glass becomes part of the furnishings in homes, studios, shops and hospitality venues. Choose the material from matt white adhesive PVC, frost film with or without print and one-way adhesive PVC. You can add a gloss or matt lamination with UV filter. The cut is square, or the material arrives untrimmed on the roll. Enter the glass sizes in centimetres: they are free. Before ordering, check the proportions, contrast and orientation of the artwork relative to the side of application.
Take a look at these too
Custom window graphics to decorate glass and windows
A decorative window graphic is an adhesive graphic designed to embellish glass rather than to advertise. It can be a large design that takes centre stage or a light pattern that complements the space. It is applied to windows, glass doors and glass partitions in homes, professional studios, shops, hotels and venues. You supply the artwork: illustrations, patterns, botanical motifs, geometric designs, elements coordinated with your brand.
Where custom window graphics are used
Custom window graphics fit into different settings, each with its own needs.
- At home: a decorated band on a glass door, a botanical motif on the kitchen window, a design on the glass of a veranda.
- In studios and offices: glass partitions with geometric designs or with the colours of the company identity, so the decoration ties in with the rest of the furnishings.
- In shops: decorations on the shop window or on interior doors that go with the display and catch customers' attention.
- In hotels, restaurants and venues: entrance glazing, screens and doors with patterns coordinated with the style of the property.
In every case the glass stays where it is: only what you see on it changes.
Thanks to made-to-measure printing, custom window graphics can also create decorations tied to a business: logos, coordinated graphics and short messages for events and special occasions.
Materials and options
There are three choices.
- Material:
- matt white adhesive PVC, with an opaque white background;
- frost film (with or without print), with the look of sandblasted glass;
- one-way adhesive PVC, which shows the graphic on one side and lets you see through from the other;
- Lamination: none, gloss lamination with UV filter, matt lamination with UV filter. It is a transparent layer over the print; gloss or matt changes the way the surface reflects light.
- Adhesive cut: square cut to the sizes you enter, or untrimmed on the roll, if you prefer to trim it yourself at the time of application.
A few useful details. Matt white PVC has an anti-glare finish and is suitable for flat, smooth surfaces, indoors and outdoors. Frost film creates privacy while letting diffused light through and cannot be laminated. One-way is a microperforated film. Without lamination, the recommended use is indoor and temporary; gloss protects against scratches, sunlight and weather, while matt has a satin, anti-glare effect. On the roll, the adhesive has to be trimmed by you.
How to choose the material
- You want a full graphic, with colours that let nothing show through: matt white adhesive PVC.
- You want glass with a frosted look, with or without a printed design: frost film.
- You want a graphic visible from the outside and a clear view from the inside: one-way adhesive PVC.
Think also about who is looking and from where. An interior door is seen from both sides, a shop window mostly from the street.
Sizes
Sizes are free. Enter the width and height of the glass to be decorated in centimetres, and the number of copies. The configurator calculates the price based on sizes, quantity and options.
If the decoration covers only part of the glass, such as a band or a panel, enter the sizes of the adhesive and not those of the whole glazed area. Measure each pane: two adjacent panels are not always the same.
How to order and prepare the file
Prepare the artwork in the same proportions as the glass. Check the contrast and decide which side it will be applied from, because the orientation of the design depends on it. Pay attention to thin details and transparencies, which read differently on glass than on a screen. Before sending the artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the chosen shipping method.
Before confirming, read the summary again: sizes, material, lamination and cut.
Ideas for custom window graphics: bands, panels and patterns
Before designing, it helps to decide how much of the glass you want to decorate. The shape of the decoration changes both the artwork and the sizes to enter in the configurator.
- Horizontal band: a decorated strip at eye level on a glass door or a partition wall. It leaves the rest of the glass clear, and you enter the sizes of the band only.
- Central panel: a design, a logo or an illustration in the centre of a panel, with clear glass around it. The cut is square, so the panel will have straight edges.
- Pattern across the whole panel: a repeated botanical or geometric motif that covers the entire surface. In this case the sizes are those of the visible glass.
- Brand-coordinated graphics: the colours and marks of the company identity carried over to the glass walls of a studio or office.
- Decoration for a special occasion: a seasonal theme or a short message for an event, to be replaced when the occasion is over.
Custom window graphics work well when the artwork takes the setting into account: a dense pattern in a narrow corridor stands out more than you might think, while on a large glazed area a sparse motif risks getting lost.
Matt white, frost or one-way: how the effect on the glass changes
The three materials give very different results, even with the same artwork. Here is what to expect from each.
Matt white adhesive PVC. The background is white and opaque, with an anti-glare finish. Where you apply the window graphic, the glass no longer lets you see through: only the graphic is visible, with solid colours. It is suitable for flat, smooth surfaces, indoors and outdoors. Choose it when the decoration has to be clearly visible and you don't need to see through that part of the glass.
Frost film. It has the look of sandblasted or frosted glass and is a solid panel. You can order it with your artwork printed in colour, integrated into the frost background, or as plain frost, without print. It creates privacy and lets diffused light through: it is the material to consider for bathrooms, medical practices, meeting rooms and any glass where you want to screen the view without darkening. It cannot be laminated.
One-way adhesive PVC. It is a microperforated film: from the outside you see the graphic, from the inside you see through. It is suited to shop windows and vehicle windows, when people inside need to keep looking out.
If you are not sure, ask yourself what should happen for the person behind the glass: see out (one-way), have privacy with light (frost) or simply find a decorated, opaque surface (matt white).
Printed frost: how to set up the artwork
On frost film, the colour print is integrated into the sandblasted background. The parts of the file with no colour stay frost: they are not empty spaces to fill, but the natural background of the decoration.
- A logo or a small design in the centre, with the rest of the surface left clear, gives satin glass with a recognisable mark.
- A motif that takes up a lot of surface leaves less frost visible and becomes the main part of the decoration.
- A printed band on the lower or upper part of the glass can accompany a frost panel that covers the whole pane.
If instead you only want the sandblasted glass effect, without any design, choose plain frost: there is no need to prepare a colour artwork.
Lamination: when to add it
Lamination is optional and is chosen according to where the window graphic will go.
- None: the print stays without additional protection. It is recommended only for indoor, temporary use, for example a decoration for a party or a season.
- Gloss with UV filter: protects the print from scratches, sunlight and weather and extends its life outdoors. The surface has a glossy look.
- Matt with UV filter: protects from scratches and sunlight, with a satin, anti-glare effect. It is useful on very bright glass, where reflections would interfere with reading.
Frost film cannot be laminated: if you choose frost, lamination stays on "none". For custom window graphics in matt white or one-way that are meant to stay for a long time, or are exposed to the sun, consider one of the two versions with UV filter.
Square cut or on the roll
With the square cut, the window graphic arrives trimmed flush to the artwork, with straight, clean edges, ready to apply. It is the simplest choice when the glass sizes are certain.
With untrimmed, on the roll, you receive the adhesive uncut and trim it yourself. It makes sense if you prefer to adjust the size at the time of application, for example on glass with an out-of-square frame or protruding gaskets.
Contour cutting is not available: the window graphic is always rectangular. If you want a free-form effect, draw the shape inside the rectangle, for example a printed motif on a frost background.
Preparing the file for custom window graphics
The window graphics on this page are square-cut adhesives in medium and large formats. For this process a mandatory bleed is not required: backgrounds and decorative graphics can run right to the edge, without shrinking the design and without creating white borders.
- Trimming can remove 1-2 mm: keep text, logos and essential frames at least 2-3 mm inside the finished size.
- On matt white PVC the parts without colour stay white; on printed frost they keep the sandblasted effect.
- Set up the file in the same proportions as the sizes you enter, one artwork for each glass size.
- Think about the side of application and the orientation: text or a logo must read correctly from the right side.
For formats, resolution and upload, read the file instructions before uploading.
Measuring glass, panels and partitions
The sizes you enter are those of the finished adhesive, so they should be taken calmly, glass by glass.
- Measure the visible glass, inside the frame, in width and height. Take into account gaskets, glazing beads and handles that take up space.
- If the glass is divided into several panels or sections, measure them one by one: even panels that look the same can differ by a few millimetres.
- For several identical panes with the same artwork, use a single configuration and enter the number of copies.
- For panes of different sizes, or with different artwork, prepare one configuration for each.
Readable artwork on glass: contrast, distance and details
A decoration that looks balanced on screen can change a lot once it is on the glass. Before uploading the file, consider three aspects.
- What is behind the glass: a bright room, a dark corridor, the street. On a light background, soft colours get lost; on a dark background, light, bold colours read better.
- How far away it is viewed from: an interior door is seen up close, an entrance glazing even from several metres away. The greater the distance, the more you need large shapes and few elements.
- How many details you include: thin lines, small text and light gradients are the first elements to lose legibility. If a part is essential, enlarge it.
A simple check: print a portion of the artwork on paper at actual size, hold it against the glass and look at it from the point where people will see it. It helps you decide text sizes, colours and empty spaces before ordering.
Coordinated series for shops, hotels and offices
When you decorate several panes in the same building, it helps to organise the order before preparing the files.
- Make a list of all the panes to be decorated, with the width and height of each.
- Group the panes that have the same size and the same artwork: for each group a single configuration with the matching number of copies is enough.
- For panes of different sizes, adapt the same artwork to each format, keeping the proportions and position of the elements.
- Choose the same material and the same lamination for the whole series, so the look stays uniform from one door to the next.
- Before confirming, compare the list of panes with the configurations in the summary: sizes, copies and artworks must match.
This way the custom window graphics of an entrance, a room and a corridor speak the same language even if the panes are not all the same.
How to order, step by step
- In the configurator, choose the material: matt white adhesive PVC, frost film or one-way adhesive PVC.
- Decide on the lamination: none, gloss or matt with UV filter. With frost it stays on none.
- Choose the cut: square cut to the sizes you enter, or untrimmed on the roll.
- Enter width and height in centimetres and the number of copies.
- Check the order summary, then upload the file with the artwork in the same proportions.
Configuration examples
- Glass door of a studio with the logo: printed frost film, square cut to the size of the glass. The printed logo is integrated into the frost background and the room keeps its light and privacy.
- Home window with a botanical motif: printed frost if you also want privacy, matt white PVC if you want solid colours on a single band of the glass.
- Shop window decorated for the season: one-way PVC if you want to keep seeing the street from inside, with a lamination with UV filter if the window gets sun.
- Office partition wall in company colours: matt white PVC with anti-glare matt lamination, square cut on each panel.
Frequently asked questions
Can I print my own design or a pattern?
Yes, the product is custom: you upload your file and it is printed on the chosen material.
Which material lets the most light through?
Frost film has the look of sandblasted glass and one-way lets you see through from one side. Matt white PVC, by contrast, has a solid background.
Can I order any size?
Yes. There are no preset formats: you enter the dimensions in centimetres.
Can I get frost film without print?
Yes, the material is listed as frost film with or without print.
Can the window graphic be contour cut?
The cut is square, or the material arrives untrimmed on the roll.
Is lamination mandatory?
No. You can choose "none", or the gloss or matt version with UV filter.
Can custom window graphics be used outdoors?
Matt white adhesive PVC is suitable for indoor and outdoor use. Outdoors, add a lamination with UV filter, which protects the print from sunlight and scratches.
Can I laminate frost film?
No, frost film cannot be laminated.
Do I need to leave a bleed in the file?
It is not mandatory for these square-cut window graphics: the background can run to the edge. Keep text and logos at least 2-3 mm inside the finished size.
I have four identical panels: how do I order them?
If sizes and artwork are identical, use a single configuration with 4 copies. If the size or artwork changes, use separate configurations.
Can you see through matt white PVC?
No. It has an opaque white background: where it is applied, only the graphic is visible. If you want to see through, consider one-way; if you want light and privacy, frost.
Can I trim the window graphic myself during application?
Yes, by choosing the untrimmed, on the roll cut: the adhesive arrives uncut and you trim it yourself.
Can I order the same artwork in several sizes?
Yes, with one configuration for each size. Adapt the file to the proportions of each format, so the design is not distorted.
Is one-way suitable for a shop window?
Yes. One-way microperforated film is suited to shop windows and vehicle windows: from the outside you see the graphic, from the inside you can still see through the glass.
Related products
To cover a commercial shop window, see the full-coverage window graphics. On dark surfaces you need the opaque adhesive for dark backgrounds. The category is Decorative window graphics.
How to choose between nearby pages: this page is designed for decorating glass in homes, studios and venues. If you need to cover an entire shop window for sales or campaigns, start with the full-coverage custom window graphics; if the glass is dark or carries an old graphic to hide, look at the opaque window graphics. If you mainly need privacy with the sandblasted glass effect, also compare the sandblasted-effect privacy films. To decorate a wall instead of glass, there are custom wall murals and adhesive wall lettering with phrases and names. All custom window graphics are in Custom window graphics: adhesives for glass and shop windows, the decorative ones in Window graphics for decorative shop windows and windows.
Dall’idea al file pronto per la stampa
Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.
Scopri il servizio di progettazione grafica
Il servizio grafico è incluso nel prezzo di stampa?
La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.
Total: 12,82 € (VAT included)