Made-to-measure frosted window graphics
Frosted window graphics: privacy film with a sandblasted effect
The privacy film on this page is a frosted, ice-effect sandblasted film, plain or printed, for windows, doors and partitions. It softens direct visibility and diffuses light, helping to separate spaces while keeping them bright.
Frosted window graphics are stickers that give smooth glass the look of sandblasted glass. They are a solution for anyone who needs privacy without installing curtains or replacing the glass: offices with glass walls, professional practices, shops, but also bathrooms and home entrances.
Which privacy film to choose
- Sandblasted-effect privacy films: the unprinted version, with a uniform sandblasted look. You receive only the base material, with no printing. Choose it when you only need privacy: bathrooms, practices, entrances, home offices, meeting rooms and internal glass walls.
- Ice-effect sandblasted film: the full-colour printed version. Choose it when you also want a logo, a decorative band or a graphic on the film, on glass partitions and office doors.
Material and print options
The material is the same for both products: ice-effect sandblasted film, an adhesive that imitates sandblasted or frosted glass and lets diffused light through. In the printed version you can choose between two options:
- colour printing, for a delicate, translucent result;
- colour printing with a white base, for fuller, more opaque colours.
The difference is most visible against the light. Without a white base, colours take on a pastel tone, let light filter through and blend with the frosted effect: this is the choice for light, translucent effects. With the white base, the graphic stands out from the background and stays legible even from a distance: this is the choice for a logo, a room number or opening hours.
Where frosted window graphics are used
- Offices and meeting rooms: to screen people sitting behind a glass wall. A band at eye level is often enough, rather than the whole pane.
- Doors and partitions: to make a transparent surface visible and indicate with a text what lies beyond.
- Shop windows and entrances of shops and practices: to cover the lower part of the glass while leaving the upper part clear.
- Bathrooms and home windows: to let in light without being seen from outside.
Plain or printed film: how to choose
The one question to ask yourself is: does the glass also need to show information, or is privacy enough?
- If you only need to screen the view, unprinted film is the most direct route. Choose the sizes and the cut type, with no file to prepare.
- If you want to add the name of your practice, your company logo or a decoration, you need the printed film. Here you also choose how to print the colours and how to cut the graphic.
- If you need to cover several panes in the same room, you can combine the two product pages with each other and with other panes left clear: plain panels on the largest surfaces and a printed band on the entrance door.
Band, full panel or contour-cut graphic
With the same film you can get different types of result, depending on the sizes and the cut you set.
- Full panel: you order the film in the size of the glass, with a straight cut. Suitable for both product pages.
- Horizontal band: you order a strip as long as the glass and as tall as the area to be screened. This too is made with the straight cut.
- Custom logo or decoration: you need the printed version, which offers kiss-cut contour cutting and die cutting. Only the shape of the graphic remains on the glass.
- Untrimmed roll: you receive the film without trimming and cut it yourself during installation. It is useful when the glass sizes need to be checked on site.
The four cut types, one by one
- Untrimmed, on a roll: the film arrives uncut and trimming is up to you.
- Straight cut: a straight cut flush with the graphic, with clean edges. This is the cut for panels and bands.
- Contour cut (kiss cut): it cuts through the film without cutting the siliconised backing, so each element peels off easily. Only in the printed version.
- Die cutting: it uses a metal die and is designed for repeated shapes and high print runs. This too is only in the printed version.
Sizes, cutting and installation
Measure the application area precisely before configuring. Unprinted film is supplied on an untrimmed roll or with a straight cut. The printed film is also available with contour cutting (kiss cut) or die cutting, with the weeding level suited to the graphic and, if needed, with application tape.
Weeding has three levels: easy, from 2 to 30 pieces with details larger than 15 mm; complex, from 31 to 100 pieces with details larger than 10 mm; very complex, over 100 pieces or details smaller than 10 mm. In the latter case, very small parts may not be weedable: if the graphic has thin lettering, consider enlarging it. With "kiss cut only" the film arrives cut, with the excess material still to be removed. Application tape holds the separate elements of a graphic together while you move them onto the glass, in the position set in the file.
Before applying the film, check that the glass is clean and intact. If there is more than one surface to cover, measure each pane the film will be applied to: even neighbouring panes can have different sizes. For a large glass wall you can divide the surface into several panels and configure them as separate items, each with its own sizes.
How to order
Set the sizes, print option and cut: price and production times are shown in the configurator. If you order the printed version, read the file instructions before uploading the graphic. Delivery also depends on the shipping method you choose.
Enter width and height in centimetres and prepare the file in the same proportions. Before confirming the order, check the sizes, number of copies and cut type in the summary.
Frequently asked questions
How much privacy does frosted film give?
It softens direct visibility, but the result changes with distance, lighting and the direction of the gaze. Consider these factors before ordering.
Does sandblasted film take light away from the room?
The sandblasted finish diffuses light instead of blocking it: this is why it is used on partitions, doors and internal glass walls where brightness needs to be kept.
Can I print my logo on the privacy film?
Yes, with the full-colour printed sandblasted film. With the white base the logo is more opaque, without the white base it stays translucent.
Are frosted window graphics made to measure?
Yes. There are no fixed sizes: enter the dimensions you need in the configurator, for a whole pane or for a band.
What is the difference between the two product pages?
The material is the same. The sandblasted-effect privacy film is unprinted and has two cut types. The ice-effect sandblasted film is printed in colour and adds contour cutting, die cutting, weeding and application tape.
Can I have a contour-cut frosted logo, without the background rectangle?
Kiss-cut contour cutting is available in the printed version: the film is cut along the outline of the graphic you upload.
When is application tape needed?
When the graphic is made of several separate elements, such as the letters of a text: the transfer film keeps them in the right position until they are on the glass. For a single-piece panel it is not necessary.
How much does frosted window film cost?
The cost depends on size, quantity, printing and cutting. The configurator calculates it for your configuration.

