Wall decal

Wall decalWall graphics installed in retail showroom corner with natural lightingWall decalWall decalLarge-format wall graphics in modern office reception – full-height brandingWall decal

No. Copies: 1; Dimensions in CM: 100x100; Material: High-tack gloss white wall PVC; Lamination: None; Adhesive cutting: Untrimmed, on a roll

The custom large-format wall sticker is a wall graphic printed on Glossy White High Tack Wall PVC, a vinyl with a strong-grip adhesive designed for walls. It is used for wall decorations, branding of offices and showrooms, store settings and trade show displays. You can leave the print unprotected or add a glossy or matte lamination with UV filter. The material arrives on a roll untrimmed, with square cut or with contour kiss cut, with weeding and application tape as options. Dimensions and copies are free: you enter them in the configurator and see the price right away.

Take a look at these too

Large-format wall stickers, custom printed with your artwork

When a wall needs to become a communication surface, a wall sticker is the most direct route: printed graphics applied to the wall that turn it into a backdrop, an indoor sign or a set design. This product is aimed at offices, showrooms, retail stores and trade show stands, where large images, logos, patterns or full-wall photographs are needed.

Where large-format wall stickers are used

Custom printed wall stickers solve a range of situations, all involving a vertical surface to be filled.

  • Offices: the logo in the reception area, company graphics in a meeting room, an operations room made recognizable by a color or an image.
  • Showrooms and retail stores: backdrops behind products, themed walls for a collection, settings that change with the season.
  • Trade show stands and exhibition displays: large graphics, where rigid panels would be too small or awkward to transport.
  • Wall decorations: patterns, illustrations and photographs covering an entire area of the wall.

The graphics can cover the whole wall with several panels placed side by side, or be limited to a band, a box or contour-cut elements.

Material and lamination

  • Material: Glossy White High Tack Wall PVC. It is a white vinyl with a glossy finish and an adhesive designed for application on walls. It is the only material for this product.
  • Lamination: None, Glossy Lamination with UV filter or Matte Lamination with UV filter. It is a transparent film over the print. With the matte version you reduce reflections from the room lighting, with the glossy one you keep a shiny surface.

Which walls it sticks to: High Tack adhesive

The material is a glossy white PVC with a High Tack adhesive with strong grip, specific to rough and porous surfaces such as plastered walls, brick and plasterboard. The glue is thicker and more rubbery than that of a standard adhesive PVC and bonds firmly where the standard one does not hold. For this reason it can replace wallpaper when you want your own graphics on a single wall, in a space open to the public as well as at home.

Lamination with UV filter protects the print from scratches and sunlight. Without lamination the print remains unprotected: this is a choice to be limited to temporary indoor displays. With contour cutting, the blade cuts only the adhesive vinyl and not the silicone liner, so each shape peels off easily. Before purchasing, check the material, finish and cut in the summary.

Cutting, weeding and application tape

  • Adhesive cut: Untrimmed, on roll; Square Cut, suitable for rectangular panels to be placed side by side; Contour Cut (Kiss Cut), for free shapes, lettering and logos.
  • Weeding of a Single Copy: applies to contour cutting. You can stop at the kiss cut only or ask for the waste material to be removed: Easy (from 2 to 30 pieces, elements larger than 15 mm), Complex (from 31 to 100 pieces, elements larger than 10 mm), Very Complex (over 100 pieces, elements smaller than 10 mm).
  • Application Tape: Not Required or Yes. It is useful if the contour-cut graphic is made up of several parts to be applied together.

For a rectangular panel, square cut and no accessories are enough. Weeding and tape come into play only with contour-cut graphics.

How to choose between the options

  • Full wall: Square Cut, with the measurements of each panel. If you prefer to trim on site along the ceiling and baseboard, consider Untrimmed, on roll.
  • Logo or single figure: Contour Cut (Kiss Cut). With the kiss cut only, you remove the waste yourself; with weeding you receive the graphic already cleaned.
  • Lettering and small separate shapes: add the application tape, so the elements can be applied all together without losing alignment.
  • Environment with strong lights or spotlights: matte lamination limits reflections on the graphics.
  • Colors and photographs to stand out: the glossy white base, with or without glossy lamination.

Sizes and quantities

There are no fixed formats: you enter the dimensions in centimeters according to the wall to be covered. The number of copies is free. The price is calculated by the configurator based on dimensions, quantity and options.

Measure the wall at several points, both in width and in height: walls and ceilings are not always regular. Mark sockets, switches, doors and other obstacles, and decide whether the graphic should go around them or stop before them. If you divide the image into several panels, each panel can be a configuration with its own dimensions.

How to order and prepare the file

Measure the wall, decide whether you need a single rectangular panel or a contour-cut graphic, then configure material and finishes. Before sending your artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the chosen shipping method.

Before confirming the order, check that the finished dimensions are in centimeters, that the file has the same proportions as the sticker and that important subjects do not fall behind a piece of furniture or on a joint. Then review the summary.

Frequently asked questions

What finish does the material have?

The vinyl is glossy white. If you prefer a surface without reflections, add the matte lamination with UV filter.

Can I print a contour-cut logo instead of a rectangular panel?

Yes. Select Contour Cut (Kiss Cut) and, if you want to receive the graphic already cleaned of waste, the appropriate weeding level.

Is there a minimum or maximum size?

The configurator accepts free dimensions in centimeters and does not offer predefined formats.

Are the wall stickers printed in color?

Yes. The graphics from your file are printed on the white vinyl.

Is lamination mandatory?

No. The choices include None, as well as the glossy and the matte version with UV filter.

Can I receive the material untrimmed?

Yes, with the Untrimmed, on roll option.

When is application tape needed?

When the contour-cut graphic is made up of several separate parts to be applied in the same relative position.

Related products

For phrases and graphics in colored vinyl, see the Wall stickers for offices and stores; for graphics that can be moved, there are the Repositionable wall decorations. The reference category is Decorative wall stickers.

Dall’idea al file pronto per la stampa

Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.

Scopri il servizio di progettazione grafica

Il servizio grafico è incluso nel prezzo di stampa?

La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.

Starting from 18,21 €/m², VAT excluded · Total: 22,22 € (VAT included)