Custom and advertising flags
Custom and advertising flags
Custom flags with a frame, in teardrop, sail-blade or rectangular shapes, and marine fabric flags for flagpoles and walls. The first are advertising flags to place in front of a shop, at a trade show or at an event. The second are printed on fabric and finished with stitching, rope or tape and eyelets, depending on the support you already have.
In every case the artwork is yours: logo, brand colors, a short message. The product changes by shape, by mounting method and by what you receive along with the print.
Which flag to choose
- Teardrop flag: for sports events, outdoor trade shows, beaches, car parks and outdoor promotions. In three sizes, with frame and flag together, frame only or flag only.
- Sail-blade flag: slender profile, for hotels, resorts, wellness centers and formal entrances. Same three sizes and same supply options as the teardrop.
- Rectangular flag with frame: offers more usable surface than teardrop and sail-blade flags, so it suits large logos and more complex messages. For dealerships, shops, trade shows and company entrances.
- Company flag: with logo and artwork of your choice, for flagpoles and structures already in place at company offices, showrooms, trade shows and institutional events. In marine fabric, made to size.
- National and institutional flag: for public offices, administrative buildings and events. Before ordering, check the artwork, orientation and requirements set by the institution.
- Banners and wall flags: for permanent indoor display, such as offices, shops, halls and showrooms, fixed directly to the wall with eyelets or loops.
Where advertising flags are used
A flag with a frame is a sign that can be seen from far away. You place it on the pavement in front of the shop, at the entrance of a car park, at the sides of a stand or along the route of an event. Several identical flags in a row mark an entrance or delimit an area and give your brand visibility even from a distance.
Fabric flags have a different use. On a flagpole they identify a location. On a wall they decorate a hall or a showroom with the company brand, or complete the fittings of an office or a shop. Here the support already exists and the flag has to be made for that support.
Shape: teardrop, sail-blade or rectangular
The shape decides how much artwork fits on the flag. The teardrop has a rounded profile at the top and narrows toward the bottom. The sail-blade is tall and slender. The rectangular one keeps the same width along the whole height and leaves more room for a wide logo or several lines of text. If the message is just a logo, all three work. If you need to add a phrase or a contact, the rectangular is the easiest to lay out.
Sizes and heights of flags with a frame
Teardrop, sail-blade and rectangular flags are available in three sizes: Small, Medium and Large. The height shown in the configurator is the total height, pole included, and it is the same for all three shapes:
- Small: 220 cm total height with the pole.
- Medium: 255 cm total height with the pole.
- Large: 335 cm total height with the pole.
Small works well near a counter or a pedestrian entrance. Large reaches up to 335 cm and is useful when the flag has to be seen from far away, for example from a road or a car park. Medium sits in between, a compromise between footprint and visibility.
What you receive: kit, flag only or frame only
For each flag with a frame, you choose what you need:
- Frame + Flag: the complete kit, with the printed flag, the fiberglass pole and the ground base. It is the right choice if you don't have anything yet.
- Flag only: the printed fabric without the frame, when you already have the pole and need to change the artwork. It fits standard fiberglass poles of the same size.
- Frame only: the fiberglass pole and the ground base, without print. It is useful as a spare or when you already have the printed flag.
When you order the flag only, check that the shape and size match the frame you own. Thanks to this split you can renew the artwork of a campaign without buying the poles again.
Marine fabric, stitching and fixing
Company flags, national flags and banners are made of 115 gr marine fabric, the only material available for these three products. Finishing comes in two levels: print only without stitching, or stitching and reinforcement around the whole perimeter. With the second, the fabric is folded over and stitched on all four sides, so it better withstands wind and pulling.
For flagpole flags you specify the side on which to sew the rope or tape, left, right, top or bottom, and whether you need the loop. Tape on the left or right side is used to fix the flag to a pole or rod. On the top side it lets you hang the flag horizontally. On the bottom side it acts as a counterweight or fixing point. The loops are metal and take ropes, carabiners or cable ties: position and number are specified in the order notes. On wall banners you can add four metal eyelets at the corners or loops; without eyelets the banner can be fixed with a system of your own, for example double-sided tape or Velcro.
The side of the rope depends on how the flag is hoisted. A flag that flies beside the flagpole has the rope on the vertical side next to the pole, on the left or on the right. A flag hung from a horizontal arm has the rope on the top side.
Format and dimensions of fabric flags
For company flags, national flags and banners the format is free. Indicate the finished width and height in centimeters. For a flagpole, start from the dimensions of the flag you are replacing, or from the height of the pole. For a wall, measure the available space and leave a margin around the banner.
Keep the finishing in mind: the folded edge of the perimeter stitching and the tape, which adds about 3 cm of folded fabric on the chosen side, take up part of the fabric. Keep logos and text away from the edges, so that no detail ends up inside a seam.
How to choose at a glance
- Promotion in front of a shop or at a trade show: teardrop, sail-blade or rectangular flag with frame.
- Entrance of a hotel or hospitality venue: sail-blade.
- Message with text in addition to the logo: rectangular.
- Flag visible from the road: Large size; pedestrian entrance or counter: Small.
- You already have the poles and are changing campaign: flag only, same shape and size.
- Flagpole already installed: company or institutional flag, with perimeter stitching and rope.
- Indoor wall: banner with eyelets at the corners.
How to order
For flagpole flags, check height, width and orientation before configuring. Check all the finishing options in the order summary: print only is not the same as a flag already made up for any pole. The configurator calculates the price based on size or dimensions, supply option and quantity. Before uploading your artwork, read the file instructions and set up the project in the proportions of the chosen shape. The configurator shows the available production times, and the shipping method you choose affects delivery.
Frequently asked questions
Can I order just the flag, without the frame?
Yes. For teardrop, sail-blade and rectangular flags you can choose flag only, frame only or both.
What sizes does a custom teardrop flag come in?
Small, Medium and Large, like sail-blade and rectangular flags: 220, 255 and 335 cm total height with the pole.
What is included in the frame plus flag kit?
The printed flag, the fiberglass pole and the ground base.
Does the company flag arrive ready for the flagpole?
It depends on the finishing options you select. For flagpole mounting, choose perimeter stitching and reinforcement, the rope or tape side and the loop if needed.
How do I fix a wall flag?
With eyelets at the corners or with loops, both selectable for banners.
What material are custom fabric flags made of?
115 gr marine fabric, the same for company flags, national flags and banners.
Do fabric flags come in fixed sizes?
No. Dimensions are free and you specify them in centimeters.
What is the difference between print only and stitching with reinforcement?
With print only you receive the printed fabric without stitching. With the second option the perimeter is folded, stitched and reinforced, a finishing to choose for flags that are mounted on a flagpole.
Where do I specify the position and number of loops?
In the order notes, after choosing the loop option in the configurator.
Can I change the artwork and keep the same frame?
Yes, by ordering only the flag in the same shape and size as the frame.





