Company flag

Company flagCompany flagCompany flagCompany flagCompany flagCompany flagCompany flagCompany flag

No. Copies: 2; Dimensions in CM: 100x100; Material: 115 g Marine Fabric; Packaging: No Stitching, Print Only; Buttonholes: Without Sleeve

Custom company flags with your logo are made-to-measure flags printed with your company's artwork. The material is 115 gr nautical fabric and the dimensions are free: you enter them in centimetres, based on the flagpole or support you have. For the finishing, choose between print only with no stitching and stitching with reinforcement around the entire perimeter. The rope or tape is stitched on the left, right, top or bottom side, and you can add an eyelet for fixing. They are displayed at company premises, showrooms, trade shows and corporate events.

Take a look at these too

Custom company flags with your logo, made to measure for your premises

A company flag carries your brand outside your premises or shop, in a showroom, at a trade show or during an event. This page is for customers who already have a flagpole, a pole or another support and need a flag in the right size, with the fixing on the correct side.

Who needs a custom company flag

It is ordered by companies, retail businesses, marketing departments and event organisers. The three most common uses are these.

  • A flag with your logo on the flagpole in front of your premises.
  • A set of identical flags for several branches or points of sale.
  • A flag for a trade show, a showroom or a corporate event, also displayed indoors on a pole.

The artwork is up to you: logo, company colours, business name, a product brand, a short message. The shape is the classic rectangle, in the size you decide.

Material: 115 gr nautical fabric

Under Material there is a single option, Nautical Fabric 115gr. Company flags are all printed on the same fabric. What changes from one order to another is the size, the edge finishing and the fixing.

Finishing: print only or stitching with reinforcement

The Finishing option concerns the edges of the flag.

  • No Stitching, Print Only: you receive the printed fabric, with no work on the sides. This is the basic version, suitable for occasional display.
  • Stitching and Reinforcement Around the Entire Perimeter: all four sides are folded over, stitched and reinforced for greater resistance to wind and tension. This is the right choice for a flag that stays on the flagpole. The folded edge adds about 4 cm per side to the overall dimensions.

Fixing: rope or tape and eyelets

  • Rope / Tape: you choose which side it is stitched to: left, right, top or bottom. On the left and right sides it is used to attach the flag to a pole or staff; on the top side to hang the flag; on the bottom side as a counterweight or for fixing at the bottom. The folded fabric adds about 3 cm.
  • Eyelets: Without Eyelets or With Eyelet. These are metal eyelets for fixing the flag with ropes, carabiners or cable ties; position and number are given in the order notes.

Before choosing, look at how your support is built: which side the flag attaches from and with what.

Size and quantity

Dimensions are entered in centimetres and are free: start from the measurements of your flagpole or structure. Flags can be small for indoor use or large for flagpoles, with no fixed formats. The number of copies is also a free field. The configurator calculates the price based on the dimensions, quantity and options chosen.

How to choose the right configuration

  • Flag on the flagpole at your premises: stitching with reinforcement around the perimeter and rope or tape on the side facing the pole.
  • Flag for a display lasting a few days: print only may be enough, with the fixing that your support requires.
  • Flag to hang: rope or tape on the top side.
  • Support with hooks or carabiners: consider the With Eyelet option and then specify position and number.

Tips on size and files

Enter the dimensions in centimetres, width by height, and remember that stitching and tape add a few centimetres of folded fabric. Check that the file has the same proportions as the size you entered, otherwise the logo will appear distorted or cropped. A flag can be seen from both sides of the flagpole: check in the summary which side the rope is on relative to the reading direction of the artwork. Review all the options before confirming the order.

How to order and prepare your file

Enter the dimensions and number of copies, choose the finishing, the rope side and the eyelets, then upload the file with your logo. Before sending the artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the shipping method chosen.

Sublimation printing with dye-sublimation inks

The company flag is printed with dye-sublimation inks: with heat, the ink passes into the fibres of the nautical fabric and becomes part of the fabric. The artwork also shows through on the back, where it appears mirrored and with less vivid colours, as is typical of sublimation flags. This printing is suitable for outdoor flags with a logo, company colours and short text.

There are no quality variants of the fabric to choose from: all company flags are made of 115 gr nautical fabric. The tape stitched on one side is ideal for hoisting the flag on a pole or staff; the metal eyelets are used to fix it with ropes, carabiners or cable ties.

Frequently asked questions about company flags

Can I order a company flag in any size?

Yes, the dimensions in centimetres are free and you decide them in the configurator.

Which side is the rope stitched to?

You choose: left, right, top or bottom.

Is print only or stitching better?

Print only is the basic version, with no stitching. Stitching with reinforcement runs along the entire perimeter, protects the edges and withstands wind and tension better.

Does the stitching change the size of the flag?

Yes, the folded edge adds about 4 cm per side; the tape adds about 3 cm on the chosen side.

What material is the flag made of?

It is printed on 115 gr nautical fabric.

Can I have eyelets instead of the rope?

Eyelets are a separate option: choose With Eyelet and give the position and number in the order notes. The side of the rope or tape must still be specified.

Can I order several identical flags?

Yes. The number of copies is free: enter the quantity you need.

Do you also sell the pole or the structure?

Not on this page, which covers the flag only. For models with a structure, see the related products.

Related products

If you do not have a support, there are the ground-standing models: the Teardrop flag, the Fin-shaped sail flag and the Rectangular flag with structure. For flags of states and institutions see the National and institutional flag; for wall display there are Banners and wall flags. All models are in the Flags category.

Dall’idea al file pronto per la stampa

Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.

Scopri il servizio di progettazione grafica

Il servizio grafico è incluso nel prezzo di stampa?

La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.

Starting from 14,57 €/m², VAT excluded · Total: 35,55 € (VAT included)