Construction and Safety Signage

Electrical Hazard sign in Dibond fixed to an industrial electrical panelOverview of safety signs: Assembly Point, Fire Extinguisher and First Aid on a construction-site wallWork in Progress sign in corrugated plastic fixed to an orange construction-site fenceHard Hat Required sign in Forex at the entrance to a construction site, with workers in the background

Quantity: 5; Panel size: 20x30 cm; Panel Type: Polionda; Panel Thickness: 3mm; Sign design: Work in progress; Graphic customisation: None; Print type: Application of self-adhesive vinyl; Material: Glossy White Adhesive PVC; Material quality: Standard; Lamination: None

The safety signage and construction site signs on this page are boards with ready-made subjects: Work in Progress, Hard Hat Required, Electrical Hazard, Emergency Exit, Assembly Point, Fire Extinguisher, First Aid and others. Alternatively, choose Custom Artwork or add the company text and logo. Sizes range from 20x30 to 70x100 cm. The substrate is Polionda, Forex or Dibond, with a thickness of 3, 5 or 10 mm. The artwork is printed by direct UV print or on white adhesive PVC, with optional lamination with UV filter. Quantities from 1 to 50 signs.

Take a look at these too

Construction site signs and safety signage

On construction sites and in workplaces, signs indicate obligations, prohibitions, hazards and escape routes. This page gathers the subjects most requested by businesses, ready to print on rigid board. All you have to do is choose which sign you need, in what size and on which material.

Who needs safety signage

Safety signage is for building companies, for whoever manages a construction site and for businesses that need to give clear instructions to employees and visitors. Which signs to display and where is decided by the safety manager.

The subjects, group by group

Each group has a recognisable shape and colour, so the sign is understood even before it is read.

  • Mandatory, blue circle: Hard Hat Required, Safety Footwear Required, High-Visibility Vest Required. They remind people of the protective equipment to wear in the area.
  • Prohibition, red circle: No Access for Unauthorised Personnel, with the crossed-out figure, for an area reserved for authorised staff; No Smoking; Construction Site Speed Limit, which shows the maximum speed allowed for vehicles in the area.
  • Warning, yellow triangle: Danger Falling Materials, with bricks falling from above; Electrical Hazard, with the lightning bolt, near live equipment; General Hazard, with the exclamation mark; Work in Progress, with the worker at work.
  • Emergency: Assembly Point, a green square with a group of people, for evacuation; First Aid, a white cross on a green background, showing where the kit is located; Fire Extinguisher, a red square, for the position of the nearest extinguisher; Emergency Exit.
  • Custom Artwork: for a sign that is not among the ready-made subjects. You upload your own artwork, which is checked and adapted to the chosen size.

Subjects, boards and options

  • Sign Subject: one of the subjects listed above, or Custom Artwork.
  • Artwork Customisation: None, for the subject printed as it is, or Customise Text and Logo, to edit the text and add the company logo.
  • Board Type: Polionda, Forex or Dibond.
  • Board Thickness: 3mm, 5mm or 10mm, depending on what the configurator offers for the chosen material.
  • Print type: direct UV print or adhesive PVC application.
  • Material: glossy white or matt white adhesive PVC.
  • Material Quality: Standard or Long Life.
  • Lamination: none, glossy with UV filter, matt with UV filter.
  • Lamination Quality: Standard or Extra UV Guard.
  • Packaging: pickup on site without packaging, or two 40 mm polystyrene sheets with perimeter edge protectors.

How to choose the board and print type

Polionda is a lightweight corrugated polypropylene, suitable for temporary construction site signage. Forex is a foam PVC board with a smooth surface, for durable outdoor signage. Dibond is an aluminium composite, rigid and weather-resistant, for permanent signs. The 3 mm thickness is light and practical; 5 mm is recommended for large sizes or signs exposed to wind; 10 mm for permanent installations.

  • Direct UV print: the subject is printed directly on the board. It is not available on Polionda.
  • Adhesive PVC application: the subject is printed on an adhesive, glossy white or matt white anti-glare, which is then applied to the board. The Material and Material Quality options refer to this adhesive. It is the only route for Polionda.
  • Lamination: a film over the print, glossy or matt, with UV filter, which protects against scratches and sunlight. Without lamination the print remains exposed.
  • Long Life and Extra UV Guard: the polymeric film and the matching lamination, to consider for a sign that stays exposed for the whole duration of the works.

Sizes and quantities

The Board Size options are 20x30 cm, 30x40 cm, 50x70 cm and 70x100 cm. Quantities are 1, 5, 10, 25 and 50 pieces per subject: from a single sign to a batch for a large construction site or an industrial facility. The price is calculated by the configurator based on size, material, quantity and options.

Which size for which distance

The size is chosen according to the distance from which the sign must be read. The 20x30 cm suits a door, the side of an electrical panel or a spot seen up close. The 30x40 cm covers corridors and entrances, the 50x70 cm outdoor and work areas. The 70x100 cm is for the fence and the site entrance, where the sign is viewed from far away or from a vehicle.

Company text and logo on signs

With Customise Text and Logo you add to a ready-made subject the company name, a contact detail or a specific instruction, for example the direction of the exit. The vector logo file is sent after the order. With Custom Artwork you upload your own file instead, with the colour and text you need: check that the proportions of the file match the chosen size.

How to order and prepare the file

With a ready-made subject and no customisation you do not need to upload anything. If you choose Custom Artwork or add text and logo, read the file instructions before sending your artwork. The configurator shows the available production times; delivery also depends on the chosen shipping.

Mandatory, warning and guidance signs

The ready-made subjects cover the safety signage groups: mandatory signs indicate an obligation (hard hat, footwear, vest), warning signs flag a risk present in the area, and emergency signs guide people towards exits, assembly points and safety equipment. By ordering the same sizes and the same material for all signs you get a consistent system throughout the site. Which signs to display and where remains a decision for the safety manager.

Frequently asked questions

Which construction site signs are available?

Mandatory, prohibition, warning and emergency signs: for example Hard Hat Required, No Access for Unauthorised Personnel, Danger Falling Materials, Emergency Exit.

Can I print a sign with my own artwork?

Yes, by choosing the Custom Artwork subject.

Can the company logo be added to a ready-made subject?

Yes, with the Customise Text and Logo option.

Which safety signage subjects relate to protective equipment?

Hard Hat Required, Safety Footwear Required and High-Visibility Vest Required, all on a blue circle.

Which signs are yellow and which are red?

Hazards and Work in Progress are yellow triangles. Prohibitions and Construction Site Speed Limit are red circles; the Fire Extinguisher is a red square.

Which materials are the signs printed on?

Polionda, Forex or Dibond, with a thickness of 3, 5 or 10 mm depending on the material.

How is the sign protected during transport?

By choosing the packaging with two 40 mm polystyrene sheets and perimeter edge protectors. Without packaging, pickup on site is provided.

Related products

For construction sites and properties you often also need For sale and to let signs; for the shop there are Shop and promotion signs. See the whole category Signs and signage.

Dall’idea al file pronto per la stampa

Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.

Scopri il servizio di progettazione grafica

Il servizio grafico è incluso nel prezzo di stampa?

La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.

Starting from 38,30 € for 5 pcs, VAT excluded · Total: 46,73 € (VAT included)