Mesh banner





No. Copies: 1; Dimensions in CM: 100x100; Material: 320 g Mesh Fabric; Cut: Untrimmed, on a roll; Eyelets: None; Tension Elastics: Without Elastics; Buttonholes: None; Banner Packaging: Folded as Sheet
The microperforated banner is a 320 gr mesh banner printed to size. It is the banner used in positions exposed to wind: construction site fences, facades, street crossings and outdoor advertising structures. Sizes are free. For the finish you choose the cut, including the square cut with reinforcement, and the eyelets: around the perimeter, corners only, on two opposite sides or as per file. You can add black or white elastic tie-down cords and request pole pockets. The banner is packaged folded flat or in a cardboard tube, as you choose.
Take a look at these too
Mesh banner: the custom microperforated banner
Microperforated banners are printed on a mesh instead of a solid sheet. They are used on construction site fences, barriers, building facades, sports field perimeters and street crossings, that is, wherever the banner stays outdoors and takes the wind. You order it with your own artwork and in the sizes of the spot where it will be mounted.
Material and finishing options
There is a single material: 320 gr mesh. The options concern how the banner is finished and fixed.
- Cut: untrimmed, on a roll; square cut; square cut + reinforcement, with a reinforced edge.
- Eyelets: none; all around the perimeter; corners only; top + bottom; right + left; as per file, with red dots marking each eyelet.
- Elastic tie-down cords: no cords, or black or white tie-down cords of 30, 20 or 15 cm.
- Pole pockets: none, or yes, to be specified later in the notes.
- Banner packaging: folded flat or in a cardboard tube.
For a fence, eyelets all around the perimeter make sense, because they let you tie the banner down along every side.
Sizes and copies
You enter width, height and number of copies yourself: the configurator does not impose fixed formats. The price is calculated based on size, copies and options.
How to order and prepare your file
Measure the available space, enter the dimensions in centimeters and choose the finishing options. Before sending your artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the shipping method you choose.
Where to mount microperforated banners
Mesh 320gr is a microperforated PVC mesh of 320 g/m², suited to large surfaces. Here are the most common installations.
- Construction site fences: the banner covers the fence and shows the company name, the project and contact details.
- Facades and scaffolding: large-format messages on buildings under renovation or on advertising spaces.
- Sports field perimeters and fences: sponsors and club name along the fence surrounding the field.
- Street crossings: banners stretched between two supports for events, local fairs and public gatherings.
- Barriers and outdoor event areas: logos and directions on barriers, stages and cordoned-off zones.
How to choose the cut and reinforcement
- Untrimmed, on a roll: the banner arrives rolled up, uncut and with extra margins. It makes sense if you prefer to trim it yourself to the actual size at installation.
- Square cut: a clean cut flush with the artwork, with straight edges. It works well when you know the exact size and do not need a reinforced edge.
- Square cut + reinforcement: a welded seam is added around the perimeter, which strengthens the edges and prevents tearing. It is the choice to consider when microperforated banners are stretched with eyelets and elastic cords.
Eyelets and elastic cords: how to fix the banner
The eyelets are metal. To fix microperforated banners, start from the structure you have available.
- Fence, frame or wall: eyelets all around the perimeter, for even fixing.
- Simple four-point fixing: corners only.
- Horizontal bars: top + bottom.
- Two vertical posts: right + left.
- Attachments at specific points, for example at the posts of a fence: as per file, with one red dot for each eyelet.
The elastic tie-down cords have a metal hook and are black or white. The 20 cm length is the standard size for most installations, the 15 cm is for closely spaced attachment points, and the 30 cm is for tensioning on fixed structures. The color is an aesthetic choice: pick the one that stands out least on your structure.
Folded flat or in a cardboard tube
Folded flat, the banner is closed into a compact bundle and wrapped in protective film. It is the standard solution for banners that will be spread out and tensioned on site, such as mesh for scaffolding: the creases disappear after a few hours of tension. If you need to display the banner right away in a cold environment, the tube is recommended.
In the rigid cardboard tube, with end caps, the banner travels rolled up and is protected from creases, crushing and abrasion. It is also useful when you plan to take down your microperforated banners and reuse them several times, because the tube makes storage easier.
Preparing artwork for microperforated banners
- The print sits on a perforated mesh: prefer large lettering and simple details, which stay legible even from a distance.
- A banner on a fence is often read while walking or driving past: limit the message to a name, a logo and one contact detail.
- Keep text and logos away from the edges, where eyelets, reinforcement and any pole pockets fall.
- With the "As per file" eyelet option, mark the red dots only where you really want an eyelet.
- Set up the file with the same proportions as the banner you order.
How to measure a fence
Measure the length of the section to cover and the usable height of the fence, then decide whether to use a single banner or several microperforated banners side by side. If you use elastic cords, subtract from the measurement the space they take up between the edge of the banner and the attachment point. Always enter the finished sizes in centimeters, width by height.
Frequently asked questions
What material are microperforated banners made of?
It is a 320 gr mesh. No other materials are available.
Can I have it with a reinforced edge?
Yes, by choosing "Square cut + reinforcement".
Can I have eyelets only at the top and bottom?
Yes, it is the "Top + bottom" option. There is also "Right + left".
Do microperforated banners let the wind through?
The 320 g/m² mesh lets air and light through and reduces wind resistance. That is why it is used in exposed positions, such as fences, facades and street crossings.
Can I insert a rod or a pole into the banner?
Yes, with pole pockets, which are sleeves for rods or poles. Choose "Yes (specify later in the notes)" and indicate position and size in the order notes. Pole pockets require an extra 30 cm of material.
Can I order several microperforated banners with different artwork?
Yes. For identical banners, with the same artwork and the same size, enter the number of copies. For different artwork or sizes, prepare a separate configuration for each banner.
Related products
To cover scaffolding see the Facade and scaffolding banners; for indoor displays the Non-woven fabric banner. Category: Banners.
To find your way around the other pages:
- Standard PVC banner and 650 g PVC banner: heavy printed banner: if you are looking for a PVC banner instead of microperforated banners, including the heavy 650 g version.
- Outdoor PVC banners and the category PVC banners: to compare outdoor PVC banners.
- Scaffolding banners and advertising sheets: if you need to cover scaffolding with an advertising sheet.
- Construction site and safety signs: for signage to place alongside the banner on the construction site fence.
- Backlit banner in backlit fabric: if the banner needs to be lit from behind.
- Custom banner for birthdays and parties: for a party or a birthday.
- The categories Custom PVC banners for advertising and Banners and microperforated mesh gather the other models.
Dall’idea al file pronto per la stampa
Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.
Scopri il servizio di progettazione grafica
Il servizio grafico è incluso nel prezzo di stampa?
La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.
Configurations
- Perforated mesh banner 100x100 cm (GB)
No. Copies: 1; Dimensions in CM: 100x100; Material: 320 g Mesh Fabric; Cut: Untrimmed, on a roll; Eyelets: None; Tension Elastics: Without Elastics; Buttonholes: None; Banner Packaging: Folded as Sheet
- Perforated mesh banner 100x100 cm (US)
No. Copies: 1; Dimensions in CM: 100x100; Material: 320 g Mesh Fabric; Cut: Untrimmed, on a roll; Eyelets: None; Tension Elastics: Without Elastics; Buttonholes: None; Banner Packaging: Folded as Sheet
Starting from 11,47 €/m², VAT excluded · Total: 13,99 € (VAT included)