Fluted board 3 mm, 100x100 cm print




Quantity: 1; Dimensions in CM: 100x100; Panel Type: 3 mm Corrugated Plastic; Front/Back Print: No; Cut: Straight Cut; Drilling: Without Holes; Packaging: In-Store Pickup; Print type: Application of self-adhesive vinyl; Material: Glossy White Adhesive PVC; Material quality: Standard; Lamination: None
The corrugated plastic sign printing service gives you lightweight custom boards, suitable for construction site signage and temporary signs. The artwork is not printed directly on corrugated plastic: it is printed on white adhesive PVC, glossy or matte, and then applied to the board. Choose the thickness from 3, 5 and 10 mm and the adhesive quality, Standard or Long Life. You can add glossy or matte lamination with UV filter, front and back graphics, straight or contour cutting and holes. Sizes are free and quantities range from 1 to 250 pieces.
Take a look at these too
Custom printed corrugated plastic signs
Corrugated plastic is a lightweight cellular board, practical for promotional signs, real estate notices, signage and temporary displays. You can customize it with your own artwork, choose the size and order one or more copies without being limited to standard dimensions.
For this product, the artwork is printed on a PVC film and applied to the board. This is a specific production choice: we do not offer direct UV printing on corrugated plastic, because ink adhesion on this surface is not adequate. If you need a neutral substrate, you can select the unprinted version.
Thicknesses and type of use
The configurator offers corrugated plastic in 3, 5 and 10 mm. Thickness should be assessed together with size, fixing method and installation location: a small sign on a tabletop and a large board exposed outdoors do not have the same requirements.
The cellular structure makes the material easy to handle, but it does not make it a structural panel. For outdoor display, choose suitable fixing points and consider the effect of wind. If you are looking for a different substrate for prolonged use, also compare Dibond and aluminium panels; for other lightweight solutions, you can consider printing on Forex.
Film, finish and protection
For the applied artwork, you can choose white PVC in a glossy or matte finish, in Standard or Long Life quality. The matte film reduces the reflective effect of the surface, while the glossy one offers a brilliant result.
Lamination is an additional protection for the print, separate from the finish of the film. Glossy and matte versions with UV filter are available, in Standard quality or Extra UV Guard. For long outdoor exposure, consider combining Long Life PVC with appropriate protection; sun, environmental conditions and maintenance will still affect the result over time.
You can print on one side only or on front and back, which is useful when the sign is seen from both directions. If you need to renew the artwork later, whether the board can be reused depends on its condition: it should not be taken for granted after any installation.
Shape, holes and delivery
- Straight cut: for rectangular signs in the requested sizes.
- Contour cut: for a custom shape, to be defined with a vector path in the file.
- Drilling: no holes, four holes at the corners or two at the centre of the right and left sides.
- Packaging: pickup at our premises without packaging, or protection with polystyrene sheets and perimeter corner guards.
Before choosing the holes, check how you will mount the board. Distances from the edges, the fixing support and the exposure should be considered together, especially on larger sizes. The price shown by the configurator includes the selected processing.
Prepare your file for printing
Set up the artwork in the proportions of the finished size. For a straight-cut sign, backgrounds can extend to the edge: there is no need to add white margins or generic bleed. However, keep important text, logos and frames at least 2-3 mm inside, because trimming may remove 1-2 mm.
For a contour shape, a cutting path is required, with the planned bleed along the printed outline. Also check that the text remains legible at the distance from which the sign will be viewed. File checking is included and you can ask for help in the chat before confirming.
For real estate communication, you will also find custom for sale and for rent signs; for job-specific indications, see construction site and safety signs.
Dall’idea al file pronto per la stampa
Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.
Scopri il servizio di progettazione grafica
Il servizio grafico è incluso nel prezzo di stampa?
La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.
Total: 23,19 € (VAT included)