Plexiglas Lettering




Quantity: 1; Dimensions in CM: 100x100; Panel Type: 3 mm clear Plexiglass; Print type: No printing; Cut: Contour Cut; Drilling: Without Holes; Packaging: Two 40 MM polystyrene sheets with perimeter bumper
Custom-shaped acrylic lettering is made of letters or logos cut from a sheet, following the outline of the path you provide. It is not a print: the shape comes from the shaped cut and the thickness is that of the material. You can choose clear acrylic in 3, 5 or 10 mm, black acrylic in 3 or 5 mm or opal acrylic in 3 or 5 mm. Drilling is optional, with four holes in the corners or two holes in the center. Sizes are free and quantities range from 1 to 250 pieces. It is used for shop signs, offices, professional practices and interior fit-outs.
Take a look at these too
Custom-cut acrylic lettering
Acrylic lettering is made of letters, names or logos cut from a sheet along their outline. The result has clean edges and real thickness, given by the material. You find it on shop signs, in offices, in professional practices and in interior fit-outs, where the brand needs to stay legible and neat.
Materials and options
- Panel type: clear acrylic in 3, 5 or 10 mm, black in 3 or 5 mm, or opal in 3 or 5 mm. Black is opaque, clear lets you see the surface behind it and opal has a milky white look.
- Print type: no print. The lettering is not printed, the color is that of the sheet.
- Cut: shaped, along the path you upload.
- Drilling: no holes, four holes in the corners, or two holes in the center of the right and left sides.
- Packaging: no packaging with pickup at our premises, or two 40 mm polystyrene sheets with perimeter edge protectors.
The cut follows the vector path of the file. Letters, outlines and inner spaces must be defined in the drawing: also check thin elements and separate parts. Choose the drilling according to the shape and the intended fixing.
Sizes and quantities
Dimensions are free and are given in centimeters: enter the overall footprint of the lettering, that is, length by height. You can order from 1 to 250 pieces. The configurator calculates the price based on size, thickness, quantity and options.
How to order and prepare the file
For this product the file contains the cutting path, that is, the outline of the custom lettering. Before sending it, read the file instructions. The configurator shows the available production times; delivery also depends on the chosen shipping method.
Decide how you will mount the lettering before confirming the file. A shape without holes is not automatically self-supporting: the fixing must be assessed based on the shape, the weight and the surface it is going on.
How acrylic lettering is made
Acrylic lettering is cut from a sheet by CNC milling that follows the vector path of your file. The outline of the letters, logos and inner parts therefore depends only on the drawing you upload. There is no print and no film: you receive the material in the color and thickness you chose. If you need a sheet with printed graphics, the right page is Acrylic printing.
Clear acrylic in 3, 5 or 10 mm
Clear has a glossy look and lets you see the surface behind it, for example the color of the wall. The 3 mm is suited to lettering and plaques for refined fit-outs. The 5 mm is more substantial. The 10 mm is the sturdiest in the listing and gives the letters a clearly visible thickness, even from the side.
Black acrylic in 3 or 5 mm
Black is opaque: the lettering stands out sharply from light walls, wood or colored panels. It is a sober choice for brands and names of professional practices, when the logo is single-color.
Opal acrylic in 3 or 5 mm
Opal has a milky white look. The 3 mm is light and flexible, useful when keeping weight down matters. The 5 mm has greater thickness and rigidity and is preferable for larger lettering.
How to choose the color
Start from the background you will mount the lettering on. On a light wall, black gives the strongest contrast. On a dark wall, opal stands out more. Clear blends with the background and mainly highlights the edges: it suits you when you want a discreet effect. The only colors available are these three: clear, black and opal.
How to choose the thickness
Thickness affects the rigidity and the side look of the letters. For small, light lettering, 3 mm is enough. For taller letters or a logo with thin parts, 5 mm is more rigid. If you want letters with a thick, solid edge, in clear you can go up to 10 mm. Remember that black and opal stop at 5 mm.
Acrylic lettering for shop signs
For an indoor sign or a shop window, the lettering usually carries the shop name or the brand. In the configurator, enter the overall footprint, that is, length by height, and choose the color based on the background it will be mounted on.
Lettering for offices, reception areas and professional practices
In offices, acrylic lettering identifies the company at the entrance, a meeting room or the reception. For a professional name, black or opal are the most legible choices. Clear in 10 mm gives letters with a full edge. If you need a plaque instead of lettering, see the Acrylic plaques.
Letters and logos for interior fit-outs
In interior fit-outs, the same listing works for single letters, words and logos to arrange on a wall. You can order identical pieces in a series, up to 250, or a single piece with the whole lettering. For raised letters made in another way, there is also the 3D letters and lettering page.
When you need holes
- No holes: the choice for single letters and small shapes, when the lettering is not fixed through holes.
- Four holes in the corners: 5 mm holes for wall fixing. They make sense on shapes with corners and enough solid surface.
- Two holes in the center of the sides: 5 mm holes in the center of the right and left sides, to hang the piece horizontally.
How to work out the size
Dimensions are given in centimeters and are free. Measure the rectangle that contains the whole lettering: from the first to the last letter for width, from the highest to the lowest part for height. A logo with protruding elements, such as accents or serifs, must be measured including them.
How to prepare the vector path
- The file must include a dedicated cutting path, with the outline of every letter or shape.
- Also define in the drawing the inner spaces to be removed, such as the voids of the letters A, O, P and R.
- A vector file is not enough on its own: what matters is that the cutting path is present and complete.
- For file format and setup, read the file instructions.
Thin elements and separate parts
The path must describe every part. Letters that are detached from each other become separate pieces. Very thin elements, such as the strokes of a light typeface, need careful checking: if in doubt, choose a typeface with thicker strokes or increase the size of the lettering.
Bleed and margins for lettering without print
Acrylic lettering is cut only, with no print: for this reason no print bleed is needed. What matters instead is the precision of the outline in the path.
Quantities and series of lettering
You can order from 1 to 250 identical pieces. A series is useful when the same lettering or logo is needed in several locations, on several doors or at several points of sale.
Packaging and pickup at our premises
For shipping, choose two 40 mm polystyrene sheets with perimeter edge protectors, the protective packaging provided for transport. Without packaging, pickup takes place directly at the production site.
How to order step by step
- Enter the overall dimensions in centimeters.
- Choose the color and thickness of the acrylic.
- Select the drilling, if needed.
- Choose the packaging.
- Set the quantity.
- Check the summary and upload the path.
Frequently asked questions
Is the lettering printed or engraved?
Neither. It is cut out of the sheet following the outline of the path.
Which colors can I choose?
You can choose clear, black or opal white. The color is that of the material, with no added print.
How thick will the lettering be?
The thickness of the sheet you choose: 3, 5 or 10 mm for clear, 3 or 5 mm for black and for opal.
What do I need to send for the order?
The path of the lettering or logo, prepared according to the file instructions.
Is bleed needed in the file?
No. The lettering is only cut, with no print, so no print bleed is needed. The file must contain the cutting path.
Can I have separate single letters?
Yes. Letters that are detached from each other in the path become separate pieces.
What is the maximum thickness?
10 mm, only in clear acrylic. Black and opal go up to 5 mm.
Related products
If you need a printed panel instead of cut-out lettering, see Forex printing, Dibond and aluminum printing or Backlit panels. The other materials are in Panel printing.
When to choose another page. If you are looking for other raised solutions, there is the 3D letters and lettering page. If you need a plaque instead of cut-out lettering, there are the Acrylic plaques. If you need a printed acrylic sheet, go to Acrylic printing. For a panel printed on other materials there are Sandwich panel printing and Corrugated plastic printing. All rigid materials are gathered in Panel printing and advertising signs.
Dall’idea al file pronto per la stampa
Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.
Scopri il servizio di progettazione grafica
Il servizio grafico è incluso nel prezzo di stampa?
La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.
Configurations
- Plexiglas Lettering (GB)
Quantity: 1; Dimensions in CM: 100x100; Panel Type: 3 mm clear Plexiglass; Print type: No printing; Cut: Contour Cut; Drilling: Without Holes; Packaging: Two 40 MM polystyrene sheets with perimeter bumper
- Plexiglas Lettering (US)
Quantity: 1; Dimensions in CM: 100x100; Panel Type: 3 mm clear Plexiglass; Print type: No printing; Cut: Contour Cut; Drilling: Without Holes; Packaging: Two 40 MM polystyrene sheets with perimeter bumper
Starting from 59,16 €/m², VAT excluded · Total: 72,18 € (VAT included)