Van stickers

Van stickersVan stickersVan stickersVan stickers

No. Copies: 1; Dimensions in CM: 100x100; Material: 3M Controltac vehicle PVC; Lamination: Gloss Lamination with UV Filter; Lamination quality: Extra UV protection; Adhesive cutting: Untrimmed, on a roll; Weeding of Single Copy: (weeding not required)

The stickers for vans and commercial vehicles bring your brand, contact details and promotional messages to vans, company cars and buses. We print them on two materials: 3M Control Tack PVC for Vehicles, for partial decoration of the bodywork, and One-Way Adhesive PVC, intended for glass surfaces. You can add a lamination with UV filter, gloss or matt, in Standard or Extra UV Guard quality. Cutting is on a roll, square or contour kiss cut, with weeding and application tape available as options. Sizes and copies are free: a practical solution for single vehicles and company fleets.

Take a look at these too

Custom stickers for vans and commercial vehicles

A van driving around town is an advertising space that never stops moving. With these stickers you can apply your logo, phone number, website and promotional graphics to vans, company cars and buses. They suit anyone fitting out a single vehicle as well as anyone who needs to give a whole fleet the same visual identity.

Who needs van stickers

Van stickers are the tool for people who work on the road and want customers to recognise them while they travel. Some examples:

  • tradespeople and installers who put their name, trade and contact details on the sides;
  • delivery and service companies with several vehicles to fit out in the same way;
  • shops and small businesses with a company car to brand;
  • companies with buses or shuttles that need to carry a campaign;
  • anyone fitting out a promotional vehicle for a limited period.

You can stick to the essential information, with contour-cut lettering and logo, or cover doors, tailgate and windows with a larger graphic.

Available materials and options

Each item in the configurator corresponds to a specific choice.

  • Material: 3M Control Tack PVC for Vehicles, for graphics on the bodywork, or One-Way Adhesive PVC, for the vehicle's windows.
  • Lamination: None, Gloss Lamination with UV filter or Matt Lamination with UV filter. It is a transparent film applied over the print.
  • Lamination Quality: Standard or Extra UV Guard. You choose it when lamination is selected.

What to know about the two materials and the lamination

3M Control Tack PVC for Vehicles is an adhesive film for partial decoration of the bodywork of cars, motorbikes and vans. The adhesive layer has glass microspheres and air channels, which help you apply the graphic without bubbles. It is not suitable for full vehicle wrapping and it can only be combined with Extra UV Guard lamination, not Standard: keep this in mind when you fill in the Lamination Quality item.

One-Way Adhesive PVC is a micro-perforated film: from outside you see the graphic, from inside you can still see through the glass. Lamination protects the print from scratches, sun and weather. Standard is the monomeric version, Extra UV Guard the polymeric one, with reinforced UV protection for long-lasting outdoor applications. Without lamination the print has no protection: it is a choice suited only to indoor and temporary use, so it is not well suited to a vehicle that works outdoors. Customise the configuration vehicle by vehicle, starting from the surface to be decorated.

Cutting, weeding and application tape

These three items decide how you receive the stickers and how much work is left to do at the time of application.

  • Sticker cutting: Untrimmed, on a roll; Square Cut; Contour Cut (Kiss Cut), which follows the outline of the graphic without cutting through the backing.
  • Weeding of the Single Copy: this is the removal of excess vinyl around the cut shapes. The choices are: weeding not required, kiss cut only, Easy (from 2 to 30 pieces, elements over 15 mm), Complex (from 31 to 100 pieces, elements over 10 mm), Very Complex (over 100 pieces, elements under 10 mm).
  • Application Tape: Not Required or Yes. It is used to transfer lettering and logos made of several parts onto the vehicle, already aligned.

In practice: a rectangular graphic covering a whole door needs neither weeding nor tape. Lettering with separate characters does, because each letter is a piece of its own.

How to choose the configuration

  • Sides, doors, bonnet: 3M Control Tack PVC for Vehicles.
  • Rear window and side windows: One-Way Adhesive PVC.
  • Finish: gloss lamination gives a shiny surface, matt lamination reduces reflections. The level is set in the Lamination Quality item: with 3M Control Tack only Extra UV Guard is compatible.
  • Logos and lettering: Contour Cut (Kiss Cut), weeding according to the number and size of the pieces, application tape.
  • Panels to be trimmed on the vehicle: Untrimmed, on a roll, if you prefer to cut to size during fitting.

To count the pieces for weeding, count every separate letter, number or symbol. Small lettering with many characters more easily falls into the Complex or Very Complex levels.

An example of a complete fit-out

A van has different areas, and each one calls for its own configuration. Here is how the work can be divided.

  • Sides: logo, business name and phone number on 3M Control Tack PVC for Vehicles, with lamination and Extra UV Guard quality. Contour cut, weeding according to the number of letters and application tape.
  • Rear tailgate: a rectangular graphic with the website and a short message. Square cut, without weeding or tape.
  • Rear window and rear glass: One-Way Adhesive PVC, which lets you see through the glass from inside.

Configure each area as a separate item, with its own measurements. If an area has pronounced curves or rivets, consider the polymeric sticker for cars and curved surfaces.

Sizes and number of copies

Enter the dimensions in centimetres: they are free, so you can adapt each sticker to the side, tailgate or window you need to cover. The number of copies is also up to you. The price is calculated by the configurator based on size, quantity and options.

Take the measurements directly on the vehicle, area by area. The two sides of a van can have different dimensions because of sliding doors, handles and mouldings. If you are fitting out several identical vehicles, use the number of copies to order the same sticker for the whole fleet.

Online ordering and file preparation

Measure the area to be decorated, choose the material suited to the surface and complete the configuration. Before sending your artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the shipping method chosen.

A few checks for a good result: finished sizes must be given in centimetres, the file must have the same proportions as the sticker, and colours and design should be compared with the colour of the bodywork. Re-read the phone number, website and other contact details, then check the summary before confirming.

How to prepare the file for van stickers

Before uploading your artwork, read the file instructions. These are the points that matter most for van stickers.

  • Square-cut graphics in medium or large format: no bleed is required. The background can run to the edge, with no white borders and without shrinking the design.
  • Text and logos: trimming can remove 1-2 mm. Keep essential lettering, logos and borders at least 2-3 mm inside the finished size.
  • Contour-cut graphics: if the print runs up to the cutting outline, an external bleed is needed. Its size depends on the product and is given in the file instructions.
  • Vector files: a vector file does not by itself mean contour cutting. You choose the cut in the Sticker cutting item.
  • One file per area: the left side, right side and tailgate often have different dimensions. Prepare one file for each, with the proportions of the measured area.

Frequently asked questions

Which material should I choose for the bodywork and which for the windows?

For the bodywork there is 3M Control Tack PVC for Vehicles. For glass surfaces there is One-Way Adhesive PVC.

What is the difference between Standard and Extra UV Guard lamination?

They are the two levels of the Lamination Quality item. You combine them with gloss or matt lamination with UV filter.

Can I order only contour-cut lettering and logos?

Yes. Choose Contour Cut (Kiss Cut), set the weeding level according to the number and size of the pieces and add application tape.

Do I have to laminate?

No, None is one of the lamination options.

Are there fixed sizes for van stickers?

No. The dimensions are free and you enter them yourself in centimetres.

Can I customise several vans with the same graphic?

Yes. Set up the configuration once and enter the number of copies you need.

Can I receive the stickers untrimmed?

Yes, with the Untrimmed, on a roll option.

Are van stickers suitable for a full wrap?

No. 3M Control Tack PVC for Vehicles is designed for partial decoration of the bodywork. To decorate an area of the car there is also the page for printed car wrapping films.

With 3M Control Tack, can I choose Standard quality?

No. This material is only compatible with Extra UV Guard lamination.

Can you see out through the decorated windows from inside the van?

With One-Way Adhesive PVC, yes. It is a micro-perforated film: from outside you see the graphic, from inside you see through the glass.

Are van stickers also suitable for company cars and buses?

Yes. The product is designed for vans, company cars and buses, both for a single vehicle and for a fleet.

Can I order contour-cut sides and a square-cut tailgate together?

Yes, with two separate configurations. Each has its own dimensions, its own cut and its own weeding level.

Is bleed needed in the file?

It depends on the cut. For a square-cut graphic in medium or large format it is not required. For a contour-cut graphic with the print running up to the outline it is: the size is given in the file instructions.

Related products

If you need a film for surfaces with slight curves, consider the Polymeric sticker; for decorating the car there is the Car wrapping film. The complete list is in the Car stickers category.

To complete your business image you can order business cards (front and back) with the same contact details written on the vehicle. To bring the same logo to your premises there are adhesive lettering and logos for shop windows. If you need other types of stickers and labels, open the Custom stickers, adhesive labels category. All the vehicle solutions remain on the Car stickers page.

Dall’idea al file pronto per la stampa

Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.

Scopri il servizio di progettazione grafica

Il servizio grafico è incluso nel prezzo di stampa?

La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.

Starting from 40,85 €/m², VAT excluded · Total: 49,84 € (VAT included)