Heavy banner 650 gsm, 100x100 cm

Heavy-duty 650 g PVC bannerHeavy-duty 650 g PVC bannerHeavy-duty 650 g PVC bannerHeavy-duty 650 g PVC banner

No. Copies: 1; Quantity: 1; Dimensions in CM: 100x100; Material: Heavyweight 650 g Banner; Cut: Untrimmed, on a roll; Eyelets: None; Tension Elastics: Without Elastics; Buttonholes: None; Banner Packaging: Folded as Sheet

The custom 650 g heavy-duty PVC banner uses a heavier material than the standard banner. There is only one material, heavy-duty 650 g banner, and sizes are free: beyond the 320 cm roll width, the banner is made from several sheets heat-welded together. It is the banner of choice for facades, fences and outdoor installations that stay on display for a long time. You complete the order with the cutting, including square cut with reinforcement, the eyelets, elastic tensioners in 15, 20 or 30 cm and any pole pockets. Quantities range from 1 to 100 pieces and the banner is packed folded flat or in a cardboard tube.

Take a look at these too

Custom printed 650 g heavy-duty PVC banner

When a banner needs to stay up outdoors for a long time, on a facade, a fence or an advertising structure, many customers prefer a heavier sheet. This page is dedicated to the 650 g banner: the same approach as the standard PVC banner, with a heavier material.

Who orders a 650 g PVC banner

  • Building companies and construction sites: banners on the fence with the company name and information about the work in progress.
  • Shops and businesses: facade banners above the entrance or along the car park.
  • Small and medium-sized businesses: permanent signage in front of the premises or the warehouse.
  • Outdoor advertising operators: banners for existing structures and frames.
  • Sports clubs and organisations: banners that stay on display for the whole season.

Material: 650 g heavy-duty banner

The material is fixed: Heavy-duty 650 g Banner. There are no finishes or back colours to choose from. The other options in the configurator define how the banner is cut, fixed and packed.

Banner cutting

  • "Untrimmed, on a roll": the printed banner arrives without trimming.
  • "Square cut": the banner is cut to the size you specify.
  • "Square cut + reinforcement": cut to size, with a reinforced edge. This is the option to consider for a banner with eyelets that will be kept under tension.

Eyelets, elastic tensioners and pole pockets

  • Eyelets: you can choose none, eyelets along the whole perimeter or only at the corners, or limit them to two sides (top and bottom, right and left). The "As per file" option lets you mark each eyelet with a red dot in your artwork.
  • Elastic tensioners: black or white, in 30, 20 or 15 cm. If you do not need them, leave "No elastics".
  • Pole pockets: if you choose "Yes", you give the details in the notes at a later stage.

Packaging

The banner can be folded flat or rolled in a cardboard tube. The choice only affects how you receive it.

650 g PVC banners: material and accessory features

The PVC banners on this page are made of extra-heavy 650 g/m² material, chosen for its mechanical and weather resistance in installations that stay up for a long time. With square cut plus reinforcement, the edge receives a perimeter weld that prevents tearing. The eyelets are metal and the elastic tensioners have a metal hook: 20 cm is the most common length, 15 cm is for closely spaced attachment points, 30 cm for tensioning on fixed structures. The pole pockets are open-ended, for inserting rods or poles. On a roll, the banner arrives rolled up, with extra margins to trim. When folded flat, banners travel in protective film and the creases flatten out under tension; in the rigid cardboard tube they are protected from creasing and crushing and can be stored after use.

How to choose the finishing options

Start from where the banner will be installed.

  • On a fence or netting: eyelets along the whole perimeter, to tie it down on all sides.
  • Between two posts: eyelets on the right and left.
  • Hung from a horizontal structure: eyelets at the top and bottom.
  • On existing attachment points: "As per file", with a red dot at each fixing hole.
  • In a frame or with your own fixing system: no eyelets, or a banner on a roll to be trimmed on site.

For the elastics, choose the length according to the space between the edge of the banner and the structure: 15 cm when the banner almost touches it, 30 cm when it stays further away. White or black depending on the colour of the structure.

Sizes and quantities

Sizes are entered in centimetres and are free. The maximum roll width is 320 cm: for larger sizes the banner is made from several sheets joined and heat-welded, so you get a single finished banner. The quantities offered are 1, 10, 25, 50 and 100 pieces. The configurator calculates the price based on size, quantity and the options selected.

Take the measurements on site and enter them as finished size, width by height. If you use elastics, allow for the space they take up around the banner.

Practical tips for your file

  • Prepare the artwork in the same proportions as the banner.
  • Keep the area near the edge clear, where the reinforcement and eyelets go.
  • For a banner that is viewed from a distance, use short texts and large characters.
  • Check the summary before ordering: size, cutting, eyelets, elastics and quantity.

How to order and prepare your file

Enter width and height, select cutting, eyelets and accessories, then upload your artwork. Before sending your artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the shipping method chosen.

Frequently asked questions

What is the maximum size of the 650 g banner?

The roll is 320 cm wide: beyond this size the banner is made in several heat-welded parts, so you can also order larger banners.

Can I choose a different material?

No, this page only offers the 650 g heavy-duty banner. For other banners, see the related pages.

Is the edge reinforcement always included?

No, it depends on the cutting option. It is included with "Square cut + reinforcement".

What colour are the elastics?

Black or white, in three lengths: 15, 20 and 30 cm.

Does the banner arrive with eyelets already fitted?

Yes, if you choose one of the eyelet options. With "None" the banner arrives without eyelets.

How many banners can I order?

The quantities offered range from 1 to 100 pieces: 1, 10, 25, 50 and 100.

Can I decide the position of each eyelet?

Yes, with "As per file": you mark each eyelet with a red dot in your artwork.

How do I specify the pole pockets?

Choose "Yes" and describe them in the notes, as the configurator asks.

Related products

The 510 g version is the Standard PVC banner. In the Outdoor banners you will also find mesh banners. Category: PVC banners.

Dall’idea al file pronto per la stampa

Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.

Scopri il servizio di progettazione grafica

Il servizio grafico è incluso nel prezzo di stampa?

La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.

Total: 18,24 € (VAT included)