Curved-surface vinyl 100x100 cm






No. Copies: 1; Dimensions in CM: 100x100; Material: Long-Life Gloss White Self-Adhesive PVC; Lamination: None; Adhesive cutting: Untrimmed, on a roll
The polymeric vinyl sticker for car bodywork is a glossy white adhesive PVC film from the Long Life line, printed with your artwork and designed for mostly flat surfaces or those with slight curves. It is used on vehicles, columns, curved furnishings and supports with moderate relief. In the configurator you choose whether to add glossy or matt lamination with UV filter, the type of cut (on roll, square or kiss-cut contour), the weeding level and the application tape. Sizes and number of copies are free: you specify them and the price updates according to your choices.
Take a look at these too
Polymeric vinyl sticker for car bodywork, custom printed
This sticker is made for decorating and advertising on surfaces that are not completely flat: vehicle sides and doors, columns, curved furnishings, panels with moderate relief. The film follows slight curves and suits logos, lettering, graphic stripes and partial vehicle decoration. It is printed in colour with your artwork: you upload the file and set sizes and finishing options to customise each piece.
Material and configurator options
- Material: just one, the Long Life Glossy White Adhesive PVC. The base is white and glossy.
- Lamination: you can leave it off (None) or choose Glossy Lamination or Matt Lamination, both with UV filter and part of the Long Life line. Lamination is a transparent film applied over the print: glossy keeps the brilliance of the material, matt reduces reflections.
- Sticker cutting: Untrimmed, on roll (you receive the printed material without trimming), Square Cut (each copy trimmed to a rectangle) or Contour Cut (Kiss Cut), which follows the outline of the artwork and leaves the backing intact.
- Weeding of the Single Copy: this applies to contour cutting and is the removal of excess material around the cut elements. You can leave just the kiss cut or specify the level: Easy (from 2 to 30 pieces, elements over 15 mm), Complex (from 31 to 100 pieces, elements over 10 mm), Very Complex (over 100 pieces, elements under 10 mm).
- Application Tape: Not Needed or Yes. It is the transfer sheet that holds separate letters and shapes in position during application.
Lamination for outdoor and indoor use
The characteristics of lamination matter above all outdoors. Both versions are polymeric films that, thanks to UV filters, protect the print from fading and weathering: they are suitable for outdoor use and adapt to curved surfaces. The matt version has an anti-glare satin effect. Without lamination the print is left unprotected, a choice best kept for indoor and temporary uses. Without application tape the sticker is applied directly from the silicone backing.
Sizes and quantities
Dimensions are entered in centimetres and are free: you specify the width and height of the sticker you need. You also enter the number of copies yourself. The configurator calculates the price based on size, quantity and the options chosen.
How to order and prepare the file
Set sizes and copies, choose lamination, cutting and accessories, then complete the order online. If you need to apply the same artwork to several surfaces, measure each one before configuring. Before sending your artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the shipping method chosen.
Frequently asked questions
Can I order the polymeric vinyl sticker without lamination?
Yes. None is one of the options. Alternatively, you can choose glossy or matt lamination, both with UV filter.
What is the difference between square cut and contour cut?
With square cut each copy is a rectangle. With kiss-cut contour cutting the blade follows the outline of the artwork and the sticker stays on its backing.
When is application tape needed?
When the artwork is made of several separate elements, such as letters or symbols: the tape transfers them together while keeping the spacing.
Can I receive the material on a roll?
Yes, by choosing Untrimmed, on roll under Sticker cutting.
Can very small parts be weeded?
Not always. At the Very Complex level, very small parts may not be weedable: after counting the pieces, also check the minimum size of the elements. This applies to custom stickers of any size.
Related products
For work vehicles see the Van stickers; for bodywork decoration there is the Car wrapping film. All the other solutions are in the Car stickers category.
Dall’idea al file pronto per la stampa
Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.
Scopri il servizio di progettazione grafica
Il servizio grafico è incluso nel prezzo di stampa?
La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.
Total: 13,13 € (VAT included)