Backlit banner for lightboxes

Backlit bannerBacklit bannerBacklit bannerBacklit banner

No. Copies: 1; Dimensions in CM: 100x100; Material: Backlit Sign Banner; Cut: Untrimmed, on a roll; Banner Packaging: Cardboard tube

Backlit is printing on a backlit banner: a backlit banner for signs that is installed in front of a light source. It is used for light boxes, lightboxes, signs and totems lit from the inside, in shop windows, in stores or at trade shows. You enter the size in centimetres and the number of copies. For the cut, choose between square cut, if you want the banner already to size, and untrimmed on a roll, if you prefer to trim it yourself during installation. The banner is packaged in a cardboard tube. The configurator calculates the price based on the size and the copies.

Take a look at these too

Backlit banner printing for signs and lightboxes

A backlit banner, also called a backlight banner, is made for light to pass through it. It is installed on light boxes, lightboxes, totems and signs, with the lamps or LEDs behind the print. It is ordered by sign makers, display installers and shops that need to put up a new sign or replace the graphics on an existing illuminated structure.

Where backlit banners are used

  • Shop and venue signs: the custom banner replaces the graphics when the name, brand or campaign changes.
  • Lightboxes in shop windows and shopping centres: messages that can be read in the evening too.
  • Large totems and light boxes: the size follows the structure, with no fixed formats.
  • Events and trade shows: illuminated panels for stands and displays.

Material and cut

  • Material: "Backlit Banner for Signs". It is the only banner material on the product page.
  • Cut: "Square cut" to receive the banner at the size you specify; "Untrimmed, on roll" to receive it without trimming.
  • Banner packaging: cardboard tube, the only option available.

The configurator does not offer eyelets, pockets, reinforcements or other fixing accessories.

How to choose the cut

The square cut is the straightforward choice when you know the exact size of the frame. The untrimmed banner on a roll makes sense if you prefer to trim it yourself at installation, on the actual structure.

Sizes and copies

Enter width and height in centimetres: sizes are free. You also set the number of copies yourself. The configurator calculates the price based on the size, the copies and the cut.

How to order and prepare the file

Measure the light box or frame, including the margin you need for fixing, and enter the values in the configurator. Check that the file has the same proportions and remember that the colours will be seen with light coming through, with the structure switched on. Before sending your artwork, read the file instructions. The configurator shows the available production times; delivery also depends on the chosen shipping method.

The banner: 480 g/m² translucent PVC

The "Backlit Banner for Signs" material is a 480 g/m² translucent PVC designed for backlighting. With light from behind, colours look bright: that is why backlit banners are installed on lightboxes, light boxes and illuminated signs.

A translucent banner is viewed in two conditions: with the structure switched on, in the evening or in a dimly lit environment, and with the structure switched off. The expected result is the one with light passing through, but it is worth designing the graphics for both situations.

How to prepare the artwork for backlit banners

  • With light passing through, more light shows where the artwork is light and less where it is dark. For text and logos, choose colours that contrast well with the background.
  • You have two options: a light background with dark text makes the whole sign look bright; a dark background with light text lets the light pass mainly through the lettering and the logo.
  • Check how much of the edge is covered by the profile or frame of your structure and keep text and logos out of that area.
  • If you included a margin for fixing in the size, leave only the background in that strip.
  • Use the same proportions as the banner you order. A sign is read from a distance: the name, the logo and a few words are enough.
  • Check spelling, phone numbers and addresses before uploading the file: they will be on show every day on the sign.

Measuring the light box for backlit banners

Before entering the sizes, check with whoever installs the structure how the banner is fixed and how much material is needed beyond the visible area. Measure width and height in centimetres, add the fixing margin and double-check the values: a banner cut too short cannot be stretched at installation.

When the sign already exists and only the graphics change, the simplest reference is the banner you are replacing: measure it and compare the result with the frame. If a banner is not the right solution for your sign, compare Opal acrylic (Plexiglas) printing and Translucent film for signs.

Tube packaging

The banner is shipped rolled inside a rigid cardboard tube with end caps. For backlit banners this is the only option available, so the banner does not arrive folded. The tube protects it during transport from creases, crushing and abrasion and makes it easier to store, even if you plan to reuse or reposition it.

Frequently asked questions

Does the backlit banner have eyelets?

No, eyelets are not available. The only finishing options concern the cut.

Can I order a made-to-measure banner for my light box?

Yes, sizes are entered freely in centimetres.

How is it packaged?

In a cardboard tube.

Is the illuminated structure included?

No. The options concern only the printed banner: light box, frame and lights are not among the configurator items. If you also need the sign, see the Illuminated sign with banner.

Can I order just one banner?

Yes, the number of copies is a free field.

Can I order different backlit banners for several signs?

Yes. For identical banners, enter the number of copies; for different sizes or artwork, prepare one configuration for each banner.

What does untrimmed, on roll mean?

The banner arrives rolled, uncut and with extra margins. Trimming is up to you, on the actual structure.

Is the artwork visible when the light is off?

The banner is translucent and designed for light from behind: the colours look as intended when the light is on. Prepare the artwork taking into account how it will look both on and off.

Related products

For an outdoor mesh banner, see the Mesh banner; for backdrops, the Non-woven (TNT) banner. Category: Banners.

Alongside backlit banners you will find other solutions for signs and displays:

Dall’idea al file pronto per la stampa

Con il servizio di progettazione grafica puoi creare una nuova composizione, vettorializzare un logo o adattare immagini e impaginazione al prodotto scelto. Condividi materiali e indicazioni in chat e rivedi le anteprime prima della preparazione dei file finali.

Scopri il servizio di progettazione grafica

Il servizio grafico è incluso nel prezzo di stampa?

La progettazione grafica è un servizio a pagamento, acquistabile separatamente. Il controllo del file di stampa rimane compreso nel prezzo del prodotto; per creare o modificare la grafica puoi acquistare il servizio dedicato.

Starting from 42,72 €/m², VAT excluded · Total: 52,12 € (VAT included)